Tom Moxon

16 Projects38 Followers0 Following
Contact
Use the Arduino101 Bluetooth wireless interface to read the Intertial Measurement Unit (IMU) with your phone or tablet using Blynk !
Arduino101 Bluetooth Intertial Measurement Unit (IMU)
4.0K
Use the Arduino101 Bluetooth wireless interface with the Blynk GUI Library for control of things directly from your phone or tablet!
Arduino101 Bluetooth Interfacing
4.4K
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
BLE Robot Using Blynk & Arduino
5.3K
Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board.
ThingSoC ESP32 Android/IoS GUI Control
6.6K
Use Embedis to store and change all your project settings on the fly, from your phone, tablet, or web browser!
Embedis: HTTP/Telnet Servers
2.1K
A passive water sensor than includes a breakout connector for a second sensor or an actuator.
ThingSoC Water Sensor For The Grove System
1.2K
The thingSoC ESP32S is an open source hardware project for the ESP32S, a radio module from Espressif.
ThingSoC ESP32 Wi-Fi Module
14K
Don't want to hard code your Blynk AuthID or WiFi credentials into your code? Then use Embedis to store and change them on-the-fly!
Blynk Using Embedis For Settings
1.1K