Pablo Trujillo

15 Projects 166 Followers 8 Following

HIL devices are excellent for real-time simulations of electronic circuits - in this project I show you how you can create your own!

Custom hardware-in-the-loop platform with Spartan7

443

An open-source hacking hardware platform based on the RP2040 with RF, NFC, USB, and SD card ready for pen testing research.

103K

In this project we are going to implement an IIR filter in an FPGA from scratch using bilinear transform and the prewarping technique.

Implementation of an IIR filter on FPGA from scratch

8.5K

In this project we are going to connect and configure a PCIe WWAN modem to a Zynq MPSOC using Petalinux and the Genesys ZU 5EV board.

Connecting a WWAN modem to Genesys ZU

777

In this project you will learn how to implement a RISC-V processor in a SmartFusion2 SoC.

Creating a RISC-V system with an FPGA

17K

Project where we will develop an overdrive guitar effect with MATLAB and Zynq.

Using MATLAB to Implement a Distortion Effect on Zynq

2.2K

This project will show you how to connect and configure an SSD NVME to Zynq US+ based TE0802 board using PetaLinux.

Connecting an SSD to an FPGA with PetaLinux

5.5K

Zynq US+ is an heterogeneous device with different kind of devices inside. On this project I will show you how to use all of them together.

Using APU + RPU + PL on Genesys ZU

6.5K