Pier8283

10 Projects 5 Followers 1 Following

A TCP tunnel over CAN bus FD (Flexible Data-rate) involves encapsulating TCP/IP packets within CAN FD frames.

TCP tunnel over CAN BUS FD with Raspberry Pi

1.5K

Simple implementation of CAN BUS logger with Raspberry Pico and MCP2518FD.

CAN FD interface for Raspberry Pico

840

Today an Ethernet to SPE adapter is still an expensive item. The idea is implement a low cost adapter with Raspberry Pi.

Single Pair Ethernet Router with Raspberry Pi

631

In the following tutorial I explain the procedure to generate ADIN1110 kernel module and load it at boot.

ADIN1110 Linux kernel configuration for Raspberry Pi

615

Single Pair Ethernet (SPE) is a technology that enables the transmission of Ethernet data over a single twisted pair of wires.

Single Pair Ethernet on Raspberry Pi

1.0K

For several months now, it has become impossible to buy a Raspberry Pi from official resellers, the alternative is Rock 4 SE

Alternative Raspberry Pi board

1.6K

In this tutorial we explain how to control the Relay Board V1.0.0 for Raspberry with a Web Server on PICO W.

Webserver relay control with Arduino PICO W

2.5K

With Raspberry PICO W and a couple of CAN BUS interfaces it is possible to perform a simple wireless can bus logger

Wireless Dual CAN BUS Logger with PICO W

452