Hardware and Software products

GNSS (GPS)

These sew-on fabric snaps are the same size used on the LilyPad SimpleSnap boards. You can sew these into your project to allow for easy ...

The new Snapdragon 820E platform provides the kind of computing power that you would expect from modern smartphones.

A standalone PCB to build a handheld computer around a Raspberry Pi Zero W.

The Snips Maker Kit is infinitely hackable, open source, and Private by Design.

Create a fully secure cellular data connection between devices and your on-premises or cloud-based systems

Junction supports inspection, mirroring, and redirection of packets passing through a Virtual Private Gateway (VPG)

Secure device certificate provisioning service to securely initialize your IoT devices for cloud connectivity

Female Crimp-on Spade terminal for use with our Micro Limit Switch.

The Ardumoto Shield is a dual-motor controller for Arduino

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The BlueSMiRF is the latest Bluetooth****wireless serial cable replacement from SparkFun Electronics!

The MG2639 SparkFun Cellular Shield is a perfect addition to any Arduino project that requires connectivity when there’s no WiFi or Ethernet

The SparkFun ESP32 Thing Power Control Shield enables the ESP32 Thing to switch up to 5A of a DC load, providing a wide variety of options t

Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board ma...

The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System.

The HIH6130 is a digital output-type relative humidity (RH) and temperature sensor combined in the same package.

The SparkFun Inventor’s Kit for the Genuino 101® board is a great way to get started with programming and hardware interaction with embed...

The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware with the Arduino programming language.

The SparkFun Lumenati 8-pack is a coin-sized board equipped with seven APA102C LEDs surrounding the outer edge of the board, one in center

The SparkFun Lumenati 8-stick is a small board equipped with eight APA102C LEDs in a row and two mounting positions.

The SparkFun Lumenati 90R is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position.

The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform

The SparkFun NEO-M9N GNSS Function Board is a high quality, geospatial board with equally impressive configuration options.

The SparkFun Proto Pedal is an easy-to-assemble kit that makes building guitar effect pedals easier. Let’s face it, most guitar pedals st...

The SparkFun Qwiic Quad Relay is a unique power accessory board that has been designed for switching not one but four high powered devices

This is the SparkFun RJ11 Breakout, two simple breakout boards for the common 6-pin RJ11 connector. These little boards can easily have o...

Do you have a good understanding of various sensors or need a variety of them for a project? This kit includes a sensor for just about ev...

The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface

The SparkFun SparkPunk Sequencer is a musical control voltage sequencer designed to control the SparkPunk Sound Kit.

The SparkFun 16-Pin SSOP to DIP Adapter is a small PCB that lets you adapt SSOP packages into a DIP footprint. These small boards are use...

The SparkFun TeensyView brings you an easy way to add a small, white-on-black OLED to your Teensy development board.

The THAT 1646 OutSmarts Breakout Board offers an easy solution to adding a balanced audio output to your circuits

The SparkFun Tinker Kit (STK) is a great way to get started with programming and hardware interaction with the Arduino programming langua...

The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity...

The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components easy.

A high-intensity laboratory-grade probe with a piercing tip for measuring pH.

The Spectacle Audio Board allows you to add sound from a microSD card to your Spectacle projects.

The Spectacle Button Board allows you to add input from buttons, switches or other contact-type sensing devices to your Spectacle projects

The Spectacle Director Board controls all the actions in a Spectacle project

The Spectacle Inertia Board makes it easy to sense motion or orientation with a Spectacle project

The Spectacle Light and Sound Kit makes it easy to incorporate button-activated sound and light effects into your projects with ease!

The Spectacle Light Board allows you to add some fairly complex lighting effects to your Spectacle projects in a streamlined manner.

The Spectacle Light Kit makes it easy to illuminate your next project at the push of a button!

The Spectacle Motion Board makes it easy to add movement to your Spectacle projects

The Spectacle Motion Kit makes it easy to move and manipulate parts in your next project at the push of a button!

The Spectacle Sound Kit makes it easy to incorporate sounds, tunes and other audio ideas into your next project and to activate them at the

A set of 8 Aluminum Plates designed for the OpenBuilds Sphinx.

These Tee Nuts have a spring loaded ball that prevents unwanted movement of the nut in the slot.

The BLE-IOT-GEVB evaluation board adds Bluetooth 5 and BLE functionality to the IoT Development Kit (IDK).

Sound Terminal 2-channel high-efficiency digital audio system

Star Grip Knob

Predictive maintenance kit with sensors and IO-Link capability

Class G capless headphone amplifier based on TS4621E

50 W+50 W dual BTL class-D audio amplifier demonstration board based on TDA7492

10 W + 10 W class-D audio amplifier demonstration board based on the TDA7491P

5 W + 5 W class-D audio amplifier demonstration board based on the TDA7491LP

Sound Terminal based on the STA333IS 2.0 channel high-efficiency digital audio system

IO-Link master multi-port evaluation board based on L6360