With USB-C Type, not only USB communication but also Ethernet!
Learn to build an SMS gateway using WIZnet Pico on Arduino IDE, sending messages from WebServer to phones via LTE Cat. M1.
It's a fun project to get the weather in real time with Picasso's interesting paintings!
This project details how to develop an embedded Linux image for a MicroBlaze design on the Arty A7 in PetaLinux.
This project walks through the details of adding the hooks for the hardware on the KR260 carrier board in a Vivado 2022.1 project.
This project shows how to use an lwIP server on the SP701 to be able to send it commands/data on a local area network (LAN).
Wiznet Rudge Pico is an Industrial Digital 8 Input/ 8 Output PLC device with PoE and RS-485 connectivity.
See how to create a base hardware design for the Spartan-7 SP701 FPGA development platform in Vivado v2021.2
This project walks through how to configure the TE0711 SoM to boot from its QSPI external flash memory using the TE0701 baseboard.
This is a vintage VFD tube clock that uses Ethernet for both power and data.
Automate your curtains and add safety to your room, using the Arduino 101, WIZ750SR and Blynk, along with sensors and actuators!
Add Ethernet connectivity to an FPGA with the WIZ750SR module. Control RGB LEDs via a Python Flask web app from your browser.
Use an Infineon 3D magnetic sensor to remotely control a robotic arm over WIZnet Serial to Ethernet (S2E).
