This was a test project to get my KiCad 9.0 install setup and decided to make some minor modifications to the original Arduino Uno R3.
MPPT based IC, which tracks the power point and charges the battery with a max rating of 1A, in the form factor of TP4056.
Quick guide on how to design a PCB with full-color UV printing
Three test tools in one that takes up very little space in a toolbox or even your shirt pocket being the size of a business card.
"Budget STM32F4 flight controller: MPU6050, BMP280. Simple, reliable for DIY drones. Perfect for learning. "
Transform the Compute Module 5 into a compact, open-source media streaming device with a surprising twist: LoRaWAN connectivity.
DIY Flipper Zero that is fully compatible with original firmware & ecosystem. Assemble using off-the-shelf modules!
This is a unique picture frame with a retro twist—a functional floppy disk! It also doubles as an auto-save button for your PC!
Hi, in this project I will show you how I made this great-looking 3D-printed Hollow clock.
Are you ready to create something both eerie and captivating?
Introducing AeroCommand: Hands-free drone control. Face and voice command your DJI mavic pro drone!
let's build a flexible Arduino
Hi everyone! In this project, I will show you an amazing eight-legged robot in the Octopod style!
This modification swaps out the battery of an 11th gen Kindle Paperwhite for one with 3.3x the capacity.
94%-efficiency alternative lipo charger with USB-C as a drop-in replacement of TP4056 with USB-C based on the TI-BQ25302 IC
We have provided the steps for different booting methods for custom carrier based on Kria K26 SoMs, it can be applied for custom carrier.
Designing and assembling a development board for the Renesas SC14CVMDECT module.
Real time control of a many solenoids.
Simple Christmas ball ornament using pcb
Naughty and nerdy 👩🏻🎨
Hi friends! I will show you how to build and use a plotter to draw vector or polar plotter images in this project.
Class D TPA3221 based Fully Assembled Amplifier board, It can output a max of 200W RMS on 2ohm load. The design is minimal and small.
Fully Hackable and Open Linux SBC for Makers. Available in multiple form factors.
This new machine includes two linear rails and two Nema 17 stepper motors for the X and Y axes.
