Rowan

9 Projects12 Followers1 Following
Bio

A tinkerer. On various platforms: RPi, Arduino, Micro:bit, ESP32. Interested in DIY electronics, radio control, robotics, 3D printing.

Joined

February 2019

Location

Brisbane, QLD, Australia

Projects
The Arduino doco could easily lead you to believe that Arduino Due does not support JTAG hardware debuggers. Not true, read on...
Hardware debugging Arduino Due with GDB and Blackmagic probe
670
This shield measures current draw on six servos in a robot arm. The full plans and software are included so you can build it yourself.
Arduino Due 6-Channel Servo Current Sensor Shield
302
This project implements a shield to connect a Braccio Robot Arm to an Arduino Due while maintaining backwards compatability.
DIY Braccio Robot Arm Shield for Arduino Due
2.1K
Iteration 3 of my continuing robot arm project gets a more powerful geared shoulder servo.
Gobilda Geared Robot Arm (Iteration 3)
801
This iteration progressed from the CAD design to a first physical build. A lot was learnt along the way.
Gobilda Robot Arm (Iteration 2)
1.1K
The mechanical design of a simple robot arm using a modular build system.
Gobilda Robot Arm Mechanical Design (Iteration 1)
1.4K
The Arduino Due has two I2C ports at 3.3V, I needed to be able to use both ports to interface to 5V devices.
Simple DIY Dual port I2C level shift shield for Arduino Due
562
A note to document experiences with my first robot arm.
Arduino (Tinkerkit) Braccio Robot Arm + Kinematics
9.6K
Products20+ Add products
Arduino Due
5 projects
Arduino IDE
3 projects
Arduino UNO
1 project
Fusion
2 projects
Channels11+ Add channels
Arduino
Top 10% Contributor
Robotics
Top 25% Contributor
Adafruit
Member
Apple
Member