Overview
Things
Story
Schematics
Code
Credits
Comments(2)

Salvatore Licitra

Salvatore Licitra

Published May 2, 2018 © Apache-2.0

Air Conditioning Control System - Emulator

An air conditioning control system (simulated by an RGB LED) using Cayenne and Arduino Uno.

IntermediateShowcase (no instructions)10,587

Air Conditioning Control System - Emulator

Things used in this project

Hardware components

Arduino UNO

×

1

DHT11 Temperature & Humidity Sensor (4 pins)

DHT11 Temperature & Humidity Sensor (4 pins)

×

1

Standard LCD - 16x2 White on Blue

Adafruit Standard LCD - 16x2 White on Blue

×

1

Breadboard (generic)

Breadboard (generic)

×

1

Male/Female Jumper Wires

Male/Female Jumper Wires

×

3

Male/Male Jumper Wires

×

20

Resistor 221 ohm

Resistor 221 ohm

×

3

RGB Diffused Common Cathode

RGB Diffused Common Cathode

×

1

Single Turn Potentiometer- 10k ohms

Single Turn Potentiometer- 10k ohms

×

1

Software apps and online services

Cayenne

myDevices Cayenne

Story

An air-conditioning control system (simulated by a RGB LED) using Cayenne and Arduino Uno.

Project created for the course of pervasive systems.

A digital temperature and humidity sensor sends the data to the microcontroller that writes them on an LCD screen and sends them to Cayenne. Using the Cayenne Dashboard we can manage the information and we can decide to switch on either the heating system (Red LED), the dehumidifier (Green LED) or the cooling system (Blue LED).

GitHub: https://github.com/SalvatoreLicitra/AirConditioningControlSystem

LinkedIn: https://www.linkedin.com/in/salvatorelicitra/

Slideshare: https://www.slideshare.net/SalvatoreLicitra2/mydevices-cayenne-95815390

Schematics

Code

Credits

Salvatore Licitra

Salvatore Licitra

1 project • 3 followers

Master of Engineering in Computer Science student at Sapienza, University of Rome

Comments

Please log in or sign up to comment.