Saman Fernando
Published © GPL3+

Bluetooth Controlled Car

This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.

BeginnerWork in progress753,322
Bluetooth Controlled Car

Things used in this project

Story

Read more

Schematics

Circuit diagram

Code

Code for Arduino blootooth controlled RC Car

Arduino
This is the code you will have to upload to your Arduino board.
char t;
 
void setup() {
pinMode(13,OUTPUT);   //left motors forward
pinMode(12,OUTPUT);   //left motors reverse
pinMode(11,OUTPUT);   //right motors forward
pinMode(10,OUTPUT);   //right motors reverse
pinMode(9,OUTPUT);   //Led
Serial.begin(9600);
 
}
 
void loop() {
if(Serial.available()){
  t = Serial.read();
  Serial.println(t);
}
 
if(t == 'F'){            //move forward(all motors rotate in forward direction)
  digitalWrite(13,HIGH);
  digitalWrite(11,HIGH);
}
 
else if(t == 'B'){      //move reverse (all motors rotate in reverse direction)
  digitalWrite(12,HIGH);
  digitalWrite(10,HIGH);
}
 
else if(t == 'L'){      //turn right (left side motors rotate in forward direction, right side motors doesn't rotate)
  digitalWrite(11,HIGH);
}
 
else if(t == 'R'){      //turn left (right side motors rotate in forward direction, left side motors doesn't rotate)
  digitalWrite(13,HIGH);
}

else if(t == 'W'){    //turn led on or off)
  digitalWrite(9,HIGH);
}
else if(t == 'w'){
  digitalWrite(9,LOW);
}
 
else if(t == 'S'){      //STOP (all motors stop)
  digitalWrite(13,LOW);
  digitalWrite(12,LOW);
  digitalWrite(11,LOW);
  digitalWrite(10,LOW);
}
delay(100);
}

Credits

Saman Fernando

Saman Fernando

1 project • 151 followers

Comments