Sensirion Software

7 Projects6 Followers1 Following
Contact
You have two sensors, having the same I2C address, which you want to connect to your ESP32 by using a separate I2C bus for each sensor.
Two separate I2C buses on ESP32
10
Looking to build a prototype with the sensors on flex PCBs from Sensirion evaluation kits? Look no further, 3 options await.
Prototyping with Sensirion flex PCBs
181
The SHT4x SmartGadget is very exposed to its environment. A housing helps protecting the device and gives it a nicer appearance.
Sensirion SHT4x SmartGadget Housing
310
This article will explain step by step how you can connect two sensors with the same i2c address to your Arduino Uno.
Using a Multiplexer to connect multiple Sensors
780
By changing the sensor address of your SLF3x sensor you can connect multiple SLF3x sensor on the same I2C bus.
Use several SLF3x sensors on the same I2C bus
350
A small experiment exploring different technologies like Electron. JS and gRPC in combination with Sensirion high speed flow sensor.
Distributed high speed flow measurement
282
Plug in your Sensirion sensor, see live measurements. Simple 'as!
Easily read out Sensirion sensor measurements on ESP32
2.7K