ESP32 GPS Tracking Device | Waterproof

ESP32 GPS Tracking Device | Vehicle Tracking System | Enclosure design.

This enclosure is designed for a GPS tracking system using ESP32 PCB. You can use this device as a portable or fixed mount somewhere. The enclosure design is compatible with waterproofing (IP 64) so you can mount this outside. We used M2 screws for the component and M3 screws with rubber washers for the covers. You can use M5 - M6 screws for the wall mount, but we recommend M6 screws.

Enclosure size (X, Y, Z):- 74mm x 83mm x 29mm

Part List:-

💠 ESP32 devkit v1 Board

💠 Ublox NEO6M GPS Module with antenna

💠 SIM800L GSM Module with antenna

💠 2G SIM Card (standard size)

💠 Battery 18650 3.7v 2000mAh with battery holder.

https://www.tme.eu/en/details/bhc-18650-1p/batteries-holders/comf/

CAD files and electronics and programming Information:-

Important:

💠We are not responsible for this project's electronic design and programming. So please test the project before starting 3d printing.

💠Please follow the part list photo/PDF for the fitting components.

💠If there is any issue with the enclosure. Please contact us. I'm happy to help you.

Contact us to design your product.

Website:- https://www.sketchwork.xyz/

Email:- info@sketchwork.xyz