Tirdad Sadri Nejad

6 Projects21 Followers4 Following
Contact
Breadboard friendly dev-stick with an embedded USB-UART bridge which acts as both a UPDI programmer and a usb-serial adapter.
ATtiny1626 Tiny-Stick development board
522
Using ATtiny24's capable ADC, this probe can measure voltages from 1mV to 20V and currents from ~1mA to 2Amps with reasonable accuracy.
Precision DIY voltage-current meter
468
A simple module to keep power banks from turning off, when your DIY circuit draws low currents.
Power Bank "Keep-Alive"
11K
Unlike many simple dimmers, this dimmer dims a resistive load based on the delievered power, not just a simple fraction of delay.
Tiny Isolated Dimmer with Linearly Corrected Output
986
With a code size of 1KB on an ATtiny13A MCU, this tiny module measures voltages up to 22 volts and current up to 5 amps.
Self-Calibrating USB Voltage/Current Meter
2.6K
A breadboard-friendly STM32F0 development board with added USB2Serial, RGB LED, 7ch hi-sink driver and a simple one-button boot mode.
Astra.Avia, an STM32F0 Development Board You Can't Refuse
2.4K