Microfire LLC

12 Projects78 Followers0 Following
Contact
Everything you need to know to use μFire's EC Probe Interface to take an EC measurement.
Quickstart: EC Measurement
461
Winner
Measure water quality in real time. Deploy sensors over a wide area, collect measurements, chart and analyze it.
Helium Water Quality Monitor
5.7K
Make an EC/pH/ORP/temperature sensor device to monitor water. Interact with it through a website using Bluetooth Low Energy.
Nano 33 IoT + EC/pH/ORP + WebAPK
40K
This will go over how to use the NoCAN platform by Omzlo and uFire sensors to measure EC, pH and ORP with graphs by the TICK stack.
Store and Graph EC/pH/ORP Data with the TICK Stack and NoCAN
2.7K
Monitor EC, pH, and temperature of a hydroponics setup and upload the data to Adafruit's IO service.
IoT Hydroponics - Using Adafruit IO for EC and pH
2.0K
This will show how to make a Bluetooth Low Energy Internet of Things device to monitor Electrical Conductivity for hydroponics.
IoT Hydroponics - Measure EC with Web Bluetooth
2.6K
An explanation of the effects of temperature on conductivity measurements.
Understanding Temperature Compensation in EC Measurements
75
A quick overview of using two uFire ISE Probe Interface devices at the same time.
How to change the I2C address of a uFire board
704