Andrey Yakovlev
Published

Arduboy

DIY Arduboy Clone

IntermediateShowcase (no instructions)355
Arduboy

Things used in this project

Hardware components

Arduboy Compatible
Arduboy Compatible
×1
Arduino Pro Micro
×1
Breadboard 5x7cm
×1
OLED Display SSD1306
SPI version, better white
×1
6x6mm Switch Buttons
i use 5 or 5.5mm of height for controls and 4.1mm for reset
×1
Slide Switch
×1
Buzzer
×1
90mAh LiIon Battery
×1
Wires
×1
Kapton tape
20mm
×1

Software apps and online services

Arduboy Uploader for Linux

Hand tools and fabrication machines

Soldering iron (generic)
Soldering iron (generic)

Story

Read more

Schematics

just simplest scheme from google

based on this scheme
added reset button (RST pin on arduino to GND)
added switch on positive battery contact (yep battery charging only when switch is on)

Credits

Andrey Yakovlev

Andrey Yakovlev

2 projects • 0 followers

Comments