This Projecty is sponsored by JLC PCB. You can checkout JLC PCB at : https://jlcpcb.com/HAR
Procedure:
Insert the IC-555 on breadboard. Connect Pin 4 and Pin 8. Connect pin 2 and pin 6. Connect pin 8 to the positive supply. Connect pin 1 to the ground. Connect 10k Resistor across Pin 7 and positive supply. Connect the capacitor across the Pin 6 and ground. Connect the ceramic capacitor across the Pin 5 and ground. Insert the 100k Variable Resistor on breadboard. Connect Pin 2 to Pin 2 of the variable resistor. Connect Pin 7 to Pin 0 of the variable resistor. Connect LEDs Anode to the Pin 3. Connect 2200HMS resistor across LEDs cathode and ground. Connect 9V Battery.
Comments
Please log in or sign up to comment.