Norbert Heinz

8 Projects8 Followers2 Following
Contact
Bio

Tinkerer & educator

Joined

March 2017

Skills

Robotics, HTML, Javascript, 3D printing, Arduino, Raspberry Pi, Linux, CNC

Location

Niedertiefenbach, Hessen, Germany

Projects
How to machine hard metals by spark erosion. With a welding inverter and an old 3D printer mechanics you can cut any conductive material.
CNC machining hardened steel with a welding inverter
142
With Electrical Discharge Machining (EDM) you can machine even the hardest metals without putting any load on the part or your CNC machine.
Engrave metals with Electrical Discharge Machining (sort of)
114
With a granules extruder you can reuse waste plastics as raw material for 3D printing
Direct Extruder for 3D printing
194
A new Rover has entered my RoboSpatium. Drive it for free and have fun!
Webcam robot with pi-top[4]
14
My RoboSpatium is a robot room populated by vehicles accessible through a browser interface - try it out!
RoboSpatium
701
3D printed, remote controlled robot for indoor and outdoor missions that is freely accessible to anybody receiving commands through Alexa.
Alexa, where's my robot? Please turn right and send a photo.
696
5 stepper motors with driver ICs, 3 standard servos and a Raspberry Pi result in a robot arm that can move in a 50x50x50cm box.
WinchBot v1.5
1.0K
WinchBot is a robot arm composed of 5 servos, three winches, an Arduino Uno and a Raspberry Pi.
WinchBot
3.9K
Products9+ Add products
Arduino UNO
1 project
Android device
0 projects
Arduino IDE
0 projects
Channels13+ Add channels
Arduino
Top 25% Contributor
Raspberry Pi
Top 25% Contributor
Robotics
Top 25% Contributor