Hackster is hosting Impact Spotlights: AI. Watch the stream live on Thursday!Hackster is hosting Impact Spotlights: AI. Stream on Thursday!

Norbert Heinz

8 Projects 8 Followers 2 Following

How to machine hard metals by spark erosion. With a welding inverter and an old 3D printer mechanics you can cut any conductive material.

CNC machining hardened steel with a welding inverter

146

With Electrical Discharge Machining (EDM) you can machine even the hardest metals without putting any load on the part or your CNC machine.

Engrave metals with Electrical Discharge Machining (sort of)

115

With a granules extruder you can reuse waste plastics as raw material for 3D printing

Direct Extruder for 3D printing

196

A new Rover has entered my RoboSpatium. Drive it for free and have fun!

Webcam robot with pi-top[4]

14

My RoboSpatium is a robot room populated by vehicles accessible through a browser interface - try it out!

701

3D printed, remote controlled robot for indoor and outdoor missions that is freely accessible to anybody receiving commands through Alexa.

Alexa, where's my robot? Please turn right and send a photo.

696

5 stepper motors with driver ICs, 3 standard servos and a Raspberry Pi result in a robot arm that can move in a 50x50x50cm box.

1.0K

WinchBot is a robot arm composed of 5 servos, three winches, an Arduino Uno and a Raspberry Pi.

3.9K