blackpanda856
Published © GPL3+

Play Music Using Arduino Uno And A Speaker

How to play music using a speaker and Arduino Uno. This is a simple project so that every beginner can make it.

BeginnerFull instructions provided63,141
Play Music Using Arduino Uno And A Speaker

Things used in this project

Hardware components

Arduino UNO
Arduino UNO
×1
Speaker: 0.25W, 8 ohms
Speaker: 0.25W, 8 ohms
×1
Male/Female Jumper Wires
Male/Female Jumper Wires
×2

Software apps and online services

Arduino IDE
Arduino IDE

Story

Read more

Schematics

Circuit Diagram

Do your connects by using this Circuit Diagram

Code

Code

C/C++
Upload this code to your Arduino board
/*Arduino speaker song tutorial
* This program will play the theme song of the Malayalam movie
* 'Ennu Ninte Moideen'. The song is 'Mukkathe Penne'.
* The song is played on the speaker connected to pin 3 and GND.
* 
* Created 26 Oct 2015
* by Akshay James
* Video at https://www.youtube.com/watch?v=LgtcUxe8fmA
*/

#include"pitches.h"

// notes in the song 'Mukkathe Penne'
int melody[] = {
NOTE_D4, NOTE_G4, NOTE_FS4, NOTE_A4,
NOTE_G4, NOTE_C5, NOTE_AS4, NOTE_A4,                   
NOTE_FS4, NOTE_G4, NOTE_A4, NOTE_FS4, NOTE_DS4, NOTE_D4,
NOTE_C4, NOTE_D4,0,                                 

NOTE_D4, NOTE_G4, NOTE_FS4, NOTE_A4,
NOTE_G4, NOTE_C5, NOTE_D5, NOTE_C5, NOTE_AS4, NOTE_C5, NOTE_AS4, NOTE_A4,      //29               //8
NOTE_FS4, NOTE_G4, NOTE_A4, NOTE_FS4, NOTE_DS4, NOTE_D4,
NOTE_C4, NOTE_D4,0,                                       

NOTE_D4, NOTE_FS4, NOTE_G4, NOTE_A4, NOTE_DS5, NOTE_D5,
NOTE_C5, NOTE_AS4, NOTE_A4, NOTE_C5,
NOTE_C4, NOTE_D4, NOTE_DS4, NOTE_FS4, NOTE_D5, NOTE_C5,
NOTE_AS4, NOTE_A4, NOTE_C5, NOTE_AS4,             //58

NOTE_D4, NOTE_FS4, NOTE_G4, NOTE_A4, NOTE_DS5, NOTE_D5,
NOTE_C5, NOTE_D5, NOTE_C5, NOTE_AS4, NOTE_C5, NOTE_AS4, NOTE_A4, NOTE_C5, NOTE_G4,
NOTE_A4, 0, NOTE_AS4, NOTE_A4, 0, NOTE_G4,
NOTE_G4, NOTE_A4, NOTE_G4, NOTE_FS4, 0,

NOTE_C4, NOTE_D4, NOTE_G4, NOTE_FS4, NOTE_DS4,
NOTE_C4, NOTE_D4, 0,
NOTE_C4, NOTE_D4, NOTE_G4, NOTE_FS4, NOTE_DS4,
NOTE_C4, NOTE_D4, END

};

// note durations: 8 = quarter note, 4 = 8th note, etc.
int noteDurations[] = {       //duration of the notes
8,4,8,4,
4,4,4,12,
4,4,4,4,4,4,
4,16,4,

8,4,8,4,
4,2,1,1,2,1,1,12,
4,4,4,4,4,4,
4,16,4,

4,4,4,4,4,4,
4,4,4,12,
4,4,4,4,4,4,
4,4,4,12,

4,4,4,4,4,4,
2,1,1,2,1,1,4,8,4,
2,6,4,2,6,4,
2,1,1,16,4,

4,8,4,4,4,
4,16,4,
4,8,4,4,4,
4,20,
};

int speed=90;  //higher value, slower notes
void setup() {

Serial.begin(9600);
for (int thisNote = 0; melody[thisNote]!=-1; thisNote++) {

int noteDuration = speed*noteDurations[thisNote];
tone(3, melody[thisNote],noteDuration*.95);
Serial.println(melody[thisNote]);

delay(noteDuration);

noTone(3);
}
}

void loop() {
// no need to repeat the melody.
}

Credits

blackpanda856

blackpanda856

2 projects • 4 followers

Comments