David Escobar

7 Projects45 Followers1 Following
Contact
Bio

Healthcare Simulation Specialist. 9+ years in healthcare.I have been actively involved with 3D printing and electronics for the past 2 years

Joined

July 2016

Skills

3D printing, Basic electronics, Cloud, Python, Arduino, Raspberry Pi, Dicom to STL, autodesk fusion360

Location

Rancho Cucamonga, California, United States

Awards1

From 4th to 10th prize

The Arduino Internet of Holiday Things

Projects
DIY thermometer, IR remote controlled. 9 different temperatures. For use in healthcare simulation training. Cost-effective solution.
DIY Patient Thermometer for Healthcare Training
1.3K
Port-Cath Trainer for healthcare training
Port-Cath Healthcare Trainer
44
Create an Airway Modification Piece with Autodesk Fusion 360.
Medical Simulation with Fusion360
1.0K
Create your own code red button for use in simulation scenarios. Flashing LEDs and button!
DIY Code Red Button for Healthcare Simulation
3.8K
Set an alarm with MKR1000 and MKR Relay Proto Shield to turn a lamp on/off.
Control a Lamp with MKR Relay Proto Shield
4.3K
Add Arduino and a Force Resistor Sensor to your next healthcare simulation project to detect the amount of pressure applied on a site!
Healthcare Skin Pressure Detector
19K
Winner
See when your kids move their presents! Detector sets off an audio alarm and sends an alert directly to your phone!
Christmas Presents Intruder Detector
5.5K
Adding real-time feedback to a CPR manikin. Allows for depth, rate, time and chest recoil monitoring.
Arduino Powered CPR Feedback Device
20K
Products15+ Add products
Arduino UNO
4 projects
Arduino IDE
3 projects
Arduino MKR1000
2 projects
Channels15+ Add channels
Arduino
Top 5% Contributor
Adafruit
Top 10% Contributor
Health & Medical Devices
Top 10% Contributor
Raspberry Pi
Top 25% Contributor
Ubidots
Top 25% Contributor