Published February 1, 2022 © GPL3+

Smart Mirror

Magic Mirror

IntermediateFull instructions provided4,485

Things used in this project

Hardware components

Arduino Nano R3

Ultrasonic Sensor - HC-SR04 (Generic)

Relay Module (Generic)

Jumper wires (generic)

LED Strip, 5 m

Led strip adapter

Software apps and online services

Arduino IDE

Hand tools and fabrication machines

Hot glue gun (generic)

Soldering iron (generic)

Story

Visit my Blog to see more:

https://www.electronicsisfun08.in/2022/12/smart-mirror-or-magic-mirror.html

Hey Guys....

Long time...Back with another project..

In this project I made a Smart Touchless Mirror, when you stand infront of the mirror, lights will automatically turns On, and when you go away from mirror lights will turns OFF.

If you like this project do comment on YouTube video, and do not forget to subscribe my channel, link is below

link is : https://studio.youtube.com/channel/UCaXI2PcsTlH5g0et67kdD6g

If you have any doubt regarding this project, you can Telegram me at +919557024177.

If you have any suggestions or project idea, kindly reach out to my channel or Telegram me at above no.

You're most welcome.

Steps to make this project:

1. Gather components like Mirror, strip lights, strip adapter, ultrasonic sensor, Arduino, relay module.

2. First take mirror and stick strip lights on back of it.

3. Then stick strip lights on vanity also. ( If you want to stick leds on other side, you can).

4. Take Arduino nano, single channel relay and strip adapter in a box,.

5. Connect ultrasonic sensor with wires.

6. Now, do connections of ultrasonic sensor and relay, and upload the code.

7. Place the box inside vanity and do connections of strip lights also from circuit diagram.

8. Place ultrasonic sensor to a place where you stand infront of the mirror.

9. Now give power to Nano/Uno and strip adapter.

Check it....Enjoy..

Your Smart Mirror is ready.

Code

Code

// https://www.youtube.com/channel/UCaXI2PcsTlH5g0et67kdD6g  //
// Smart Touchless Mirror//
// By MOHD SOHAIL //


int relay = 9;
int Trig = 6;
int Echo = 5;

void setup() 
{
  Serial.begin(9600);
  pinMode(relay, OUTPUT);
  pinMode(Trig, OUTPUT);
  pinMode(Echo, INPUT);
}

void loop() 
{
  long tim;
  long dist;

  digitalWrite(Trig, HIGH);
  delayMicroseconds(10);
  digitalWrite(Trig, LOW);

  tim = pulseIn(Echo , HIGH);

  dist =((0.0343)*tim)/2;
  delay(10);

  if (dist < 30)
  {
    digitalWrite(relay, HIGH);
  }
  else if (dist >= 30)
  {
    digitalWrite(relay, LOW);
  }
}

Credits

mohammadsohail0008

42 projects • 31 followers

Smart Mirror

Things used in this project

Hardware components

Software apps and online services

Hand tools and fabrication machines

Story

Schematics

Circuit Diagram

Code

Code

Credits

mohammadsohail0008

Comments

Embed the widget on your own site

Smart Mirror

Smart Mirror

Things used in this project

Hardware components

Software apps and online services

Hand tools and fabrication machines

Story

Schematics

Circuit Diagram

Code

Code

Credits

mohammadsohail0008

Comments

Related channels and tags