An e-textile glove that combines an IMU, flex sensors, and touch input to drive reactive LEDs, vibration, and sound.
ESP32DIV is a dual-purpose wireless testing toolkit powered by an ESP32
An autonomous RC car that uses a Raspberry Pi 5 to perform lane-keeping along a track, via steering and speed control.
How to Build an Arduino Nano Oscilloscope with OLED Display (SH1106) – Full Guide with Circuit & Code
WatchBot S3 is an ESP32 S3-based Streaming Camera made from scratch.
This project presents an interactive robotic arm visualization implemented using Python and Tkinter on a Raspberry Pi.
Carrotech: leveraging IoT technology, durability, and engineering to enhance, optimize and revolutionize traditional farming
In this project, we provide Maker's nRF54L15 Debug Board. We have designed a compact board featuring the powerful nRF54L15 Wireless SOC.
Bring your board to life with emotions!
Visual bus tracker (Chicago) using a Raspberry Pi Zero 2W and a round display.
We converted an RC car into an autonomous vehicle, utilizing a Raspberry Pi 4 and an encoder to provide lane-keeping and speed control.
An autonomous RC car that follows lanes and stops at red markers using uses computer vision and real-time speed feedback.
An RC car with a Raspberry Pi running onboard vision and PID control for autonomous speed control and lane assist.
To widen the memory size and CPU power, I replaced the ATmega328P to ESP32-C3 for R909-VFO PCB. And also porting the sketches related.
Train with a Glitching Platform to learn how to bypass microcontrollers' security controls, using RP2350 and FaultyCat.
Getting Started with Infinite-ISP, the open source image signal processor on Efinix Titanium Ti180 J484 Development kit.
My solution is fermentation monitoring for post-harvesting coffee processing
This project I made for my embedded system training in the year 2018
The GP-02-Kit is a compact development board integrating a ceramic antenna and the AT6558R BDS/GNSS multi-mode satellite navigation SoC.
Compact ESP32-S3 + FPGA +LCD dev board with Wi-Fi, web-based JTAG/debug, voltage-tunable I/O, and local GDBServer/OpenOCD/FPGALoader tools.
Make your own Mini DC IPS (Inverter Power Supply) at home using basic electronic components and an LM317 voltage regulator.
A DIY device with a 12V motor, portable battery, and fume extraction, perfect for makers to enhance their workspace with power and safety.
Build your own wireless smart lighting system with ESP32-C6 using Zigbee for reliable, low-power communication.
This is part 2 of out PIC getting started series, Today we will see a hardware setup of a PIC, easy to program, a development board.
