Hardware and Software products

The Arduino Esplora is a ready-to-use, easy-to-hold controller that lets you explore infinitive possibilities.

Build your first Internet of Things project or simply make an existing device smarter.

A fully managed service for real-time streaming data ingestion and processing – simply create a stream and let the service handle the rest.

The MQ7 is a simple-to-use Carbon Monoxide (CO) sensor suitable for sensing CO concentrations in the air.

3.7 V Battery that plugs directly into C.H.I.P.! Make that project portable!

A free-to-use cross-platform SDK that lets your applications send and receive data using sound, using a device's existing speaker and mic.

Kit include Servos Horns x4 & Screw x3

ESPectro Core helps makers of all levels of expertise to be more productive and head straight to doing things that matter.

An embedded dosing pump.

This module is the best way to add a GPS to your wearable project.

gen4 7.0" Diablo16 Intelligent Display Module Capacitive Touch, with Cover Lens Bezel

Create, play, remix, then share your inventions with the world.

It features the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity.

Grove - Buzzer is a simple yet enjoyable twig to use. It can output noise at a volume over 85 dB and is integrated with Grove interface.

a connected robot controller

Out-of-the-box ready motor control development kit based on the Kria K24 SOM

M5GO IOT Starter Kit is designed for learning IOT programming which consists of 6 units(ENV, IR, RGB, PIR, ANGLE,HUB), one white M5GO bottom

It's compatible with Leaf Maple. But It's a mini version. It only need 9$. And It supports Arduino IDE. It's cool to program it with Arduino

mcGateway is a bridge between the mcModules and the cloud. It facilitates the movement of data between the modules/devices and the internet

The Mega-B Development kit is a tool for rapid prototyping of an IoT prototype, from hardware to the cloud.

The Temperature Probe is an accurate, waterproof temperature sensor that connects directly to the extension port on the Modulo base.

The famous ultra low power MSP432 32-bit microcontrollers from Texas Instruments

For individual developers,myAGV is a preferred choice as a robot platform with multiple functions at an affordable price.

OpenScope MZ is a USB/WiFi oscilloscope with a Waveform Generator and Logic Analyzer.

2-Channel 1 amp Relay Shield for Particle Photon

4-Port Relay Board is a PHPoC smart expansion board for relays.

The Pmod NAV uses a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, and barometer to provide users with 10-DOF functiionality.

1000's of free games, with built-in game making tools—and it fits in Your Pocket.

Extend all pins of the Arduino out to 3.5mm pitch screw terminals, and prototype away on a shield with rich I/O elements.

ProtoStax Enclosure for Raspberry Pi 5 / 4 / 3 Model B/B+ gives you a modular prototyping enclosure that can fit several different Pis

Pubkeeper™ is a communications broker that enables a system of disparate devices and technologies to communicate with each other

Consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages

The Raspberry Pi 400 is a complete Raspberry Pi 4-based personal computer, integrated into a keyboard. By incorporating the board into a ...

A long add-on board for the RFduino DIP module that supplies 3.3V to your whole project.

SenseCAP M1 is a high-performing, ready-to-use LoRaWAN indoor gateway compatible with Helium LongFi Network.

Solar Power Manager 5V is a small power and high-efficiency solar power management module designed for 5V solar panel.

Half battery charger, half battery monitor, and all you’ll ever need to keep your battery-powered project running safely and extensively.

This simple board breaks out a female USB type A connector’s VCC, GND, D- and D+ pins to a 0.1" pitch header

The Weather Shield is an easy to use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temp...

The STM32 Nucleo-32 board (NUCLEO-F031K6, NUCLEO-F042K6, NUCLEO-F303K8, NUCLEO-L011K4, NUCLEO-L031K6, NUCLEO-L432KC) provides an affor...

Thanks to Bosch, now we’ve got a three-in-one, low-cost and high-precision environmental sensor, the Grove - Temp&Humi&Barometer Sensor (BME

Arduino board with IoT connectivity for 3D gesture control, motion capture, tracking and vibration measurement.

Designed to build IoT prototypes and demos without building hardware or firmware

The Nordic Thingy:91 is an easy-to-use battery-operated prototyping platform for cellular IoT using LTE-M, NB-IoT and GPS

Measure light with your TinyDuino - this TinyShield approximates the human eye's response to light.

Arty is a ready-to-use development platform designed around the Artix-7 Field Programmable Gate Array (FPGA) from Xilinx

The Arty Z7-10 is a ready-to-use development platform designed around the Zynq-7000™ All Programmable System-on-Chip (AP SoC) from Xilinx.

Fast, highly secure and programmable content delivery network (CDN)

A hosted queue for storing messages as they travel between computers, making it easy to build automated workflow between Web services.

Extra horsepower in BeagleBone Black form-factor, including more PRUs, audio/video accelerators, DSPs and AI accelerators

The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is b...

Ultra-Mini Bluetooth CSR 4.0 USB Dongle Adapter Connect to your MetaSensor.  

A pair of BNC-terminated oscilloscope probes, perfect for use with the Analog Discovery in conjunction with the Discovery BNC Adapter.

Caravel is a standard SoC harness with resources (cpu, sram, interfaces) to control and read/write operations from a user-dedicated space.

Crazyradio PA is a long range open USB radio dongle based on the nRF24LU1+ from Nordic Semiconductor.

DBaaS TimeSeries by OVH.com is a Platform as Service tailored for the IoT market. A simple and robust service for storing your datas

The Adafruit Feather nRF52 Bluefruit is another easy-to-use all-in-one BLE board, with a native-Bluetooth chip

The Grove - 3-Axis Digital Compass is a digital compass sensor based on Bosch BMM150.

It features an HP206C high-accuracy chip to detect barometric pressure, Altimeter and temperature.

The Grove - CO2 & Temperature & Humidity Sensor (SCD30) is a high precision carbon dioxide sensor, which is based on Sensirion SCD30.