Hardware and Software products

Oh oh oh, put together a kit that shows you the journey of Santa Claus!

There is a new robot crawling into town and they call it Antsy!

This kit has everything you need to build a fully programmable rover robot!

If you are looking for a solenoid for your DIY, educational, or Arduino solenoid project the RobotGeek solenoids are a great choice.

Want to make your project kick into gear when life turns up the heat? The RobotGeek Temperature Sensor can feel its way through!

This super strong, high quality, beautifully designed router /spindle mount is the perfect addition to your build!

RS485 is a unit used for converting TTL level to RS485 level.

Equipped with 32-bit microcomputer RX family RX72N, GUI creation using LCD, HMI development, and IoT device development

Access serial, analog, or digital I/O data over Ethernet!

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD!

Turn your mcModule120 into a Sensor Beacon with support for Eddystone.

Makes it simple and easy to connect sensors and devices to any 96Boards-compatible base board

The Servo (PWM) Expansion allows your Omega to output up to 16 PWM (Pulse Width Modulation) signals simultaneously.

Best suitable for inspiratory flow measurements.

SIGFOX Xbee Socket Module

Sitara™ AM335x Processors: Arm® Cortex-A8 family with 3D graphics, Industrial Ethernet and flexible peripherals

Sitara™ AM437x Processors: Scalable Arm Cortex-A9 family with Secure Boot & enhanced industrial communications

Perfect for systems with a medium number of I/O lines. This board can control a TFT display and a keypad.

UVA, UVB, Light (VEML6075 & TSL4531)

M5Stack Slide Nut for 1515 Aluminum Profile 10pcs a Set

Hide wire runs along the channel of aluminum extrusion. Dress up any build!

Washer can be used to bridge the slot on V-Slot or compatible extrusion to allow for the mounting of various components.

Extreme temperatures and humidity levels can freeze pipes, create leaks, encourage mold, and cause thousands of dollars worth of damage...

6LoWPAN Gateway

Easy to assemble idler free wheel that can be used with Timing Belt up to 9mm wide!

This M4 Screw is a low-profile socket head cap screw.

If you are looking for an Arduino solenoid valve the RobotGeek liquid solenoid valve is a perfect solution.

Capable of switching one on-board SPST relay

Privately connect IoT devices with your AWS Virtual Private Cloud (VPC)

SORACOM Endorse offers hardware-based device authentication for any device with a SORACOM Air SIM

Enable secure VPC-to-device connections as well as communication between devices

SORACOM Inventory lets you remotely monitor and manage the status and settings of your connected devices

For use with the V-Slot Gantry Plate. This spacer allows you to raise the Gantry Plate up away from the rail and run components underneath.

The SparkFun Adjustable LiPo Charger is a single-cell lithium polymer (LiPo) and lithium ion battery charger.

The SparkFun SGP40 Air Quality Sensor provides a measurement of the quality of the air in your room or house. The SGP40 is based on Sensi...

The Ardumoto Shield is an easy-to-use dual-motor controller for Arduino

The world's first module to bridge the market between hobbyists and consumer products.

The SparkFun AutoDriver board is based on the STMicro L6470 dSPIN stepper motor driver. This powerful chip allows you to control a steppe...

This board lets you create a benchtop power supply with enough juice to run almost any of your embedded electronics projects.

Description: The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/p...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board with equally impressive configuration options. The SAM-M8Q is a 72-channel...

With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the...

This is a breakout board for Honeywell’s HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as an an...

Behold, the Hydra! This USB power cable probably looks a lot like something you’ve hacked together before. We do it all the time, because...

The SparkFun Blynk Board is specially designed to work with the ‘widgets’ within the Blynk mobile app to create your next IoT project.

The SparkFun LP55231 LED Driver Breakout is a self-contained solution for developing and deploying the nine-channel I2C LED controller. R...

The SparkFun Lumenati 3x3 is a small, rectangular board equipped with nine APA102C LEDs arranged in a 3x3 array.

The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED displa

The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card

The PicoBoard allows you to create interactions with various sensors. Using the Scratch programming language, you can easily create simpl...

The SparkFun Pi Servo HAT allows your Raspberry Pi to control up to 16 servo motors in a straightforward manner via an I2C connection

The Android Things Kit is a set of hardware that when paired with the Edison Base Kit, provides a set of hardware to start using Android ...

The SparkFun ProtoShield Kit is based off the Arduino R3’s footprint that allows you to easily incorporate it with favorite Arduino-based de

The SparkFun Raspberry Pi Zero W Camera Kit provides you with a pan/tilt camera controlled via a Raspberry Pi Zero W.