Hardware and Software products

The Johnny-Five Inventor’s Kit (J5IK) is your go-to source for developing projects using the Tessel 2 and the Johnny-Five programming fra...

This 6" ribbon cable incorporates multiple signal-ground pairs and facilitates error-free connections.

High Resolution Stereo Audio Amplifier

The Kinetis K22 - 120 MHz is a Low Power, High Performance, USB Microcontroller

Turns Raw Data to Insights, Foresights and Actions

A high-performance, palm-sized SBC (single board computer). It includes a Windows 10 Pro OEM activation key.

RM46L852 LaunchPad

RM42L432 LaunchPad

LEGO+ is a LEGO DC Motor Driver module. It’s built in MEGA328 chip for driving and manage each motor port.

M5Stack New LEGO Motor Adapter Cable

We’ve updated the Simple board to create the LilyPad USB by replacing the classic ATMega328 with the new ATMega32U4.

This simple board holds a 20mm coin cell battery (such as a CR2032) and gives you four connection points (two positive and two negative).

The LilyPad Design Kit (LDK) is a great way to get started with e-textiles. The LDK includes everything you need to complete 6 simple exp...

This is a simple pack of five Blue LilyPad LEDs that are still attached to one another

A new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled or broken down.

One of the great features of these end mounts is the ability to mount to the ends as well as the bottom.

The LinkIt™ Connect 7681 development board provides you with easy access to the five GPIO pins and one UART port — each with an LED — of the

Co-design by Seeed and MTK High performance board for wearable and IoT Rich - Features Rich - compatibility Strong extensibility.

3 SIZES! Shaft Collar, Set Screw Type. Great for use on ACME threaded rod or smooth shaft.

LoRa is a module with small LoRa module named Ra-02.

LoRa Raspberry Pi Hat is an extension for Raspberry Pi that lets you send data over long distances with an extremely low data rate.

Get your proof of concept up and running in hours, not weeks with our pre-configured hardware, connectivity, and Losant resources.

The LSM303DLH is a triple axis accelerometer combined with a triple axis magnetic sensor.

Seeed’s LTE CAT.1 Pi HAT is an open source cellular extension modem for Raspberry Pi, based on u-blox LARA-R2xx series.

open source cellular extension modem for Raspberry Pi

Bring all the history of video gaming in the palm of your hands.

Reliable 24/7 remote condition monitoring for motors, pumps, gear boxes, fans, and more.

Add some light to your project with this selection of over 50 colourful LEDs.

You may be the greatest living banana-pianist, but how will you ever know if you don’t make yourself a banana piano? Good news, that proj...

It is the smallest ESP32 board now. And It uses Espressif Sip ESP32-PICO-D4 chip, which has two cores, up to 240MHz for WiFi and Bluetooth.

Enable engineers to design, simulate, and implement algorithms

Interfaces the MAX11205 16-bit ADC to any system that utilizes Pmod™-compatible expansion ports configurable for GPIO interface.

Implement ultra low-power, AI solutions using a MAX78000 Arm Cortex M4F processor with a Convolutional Neural Network accelerator.

Quickly develop prototypes and proof of concept using the mcThings platform without the need for soldering!

OpenBuilds Chrome Steel V Wheel is great for use with any hard V Rail Linear Guide System.

Great for use with any hard V Rail Linear Guide System.

MetaMotion is our motion tracking and fitness solution. The MetaMotion R board comes with a Case, Wearable accessory, a rechargeable Batt...

A DC-DC adjustable step-down (buck) converter that is designed to deliver a substantial amount of current to very demanding loads

MICO makes it easy for Arduino users to create projects using cell phones

The MicroSD Module reads and writes high-density media from microSD cards. The Module ships with a 2GB microSD card.

Accelerates complex prototyping by interconnecting a MicroZed SOM and industry-standard FMC Modules.

This kit is a versatile platform for industrial networking applications. Get your Zed on the net!

MindSphere is a powerful IoT operating system with data analytics, connectivity capabilities, tools for developers, applications and service

The Mini Dock for the Onion Omega is designed to power your Omega for applications that do not require GPIO pins.

These micro-hook test clips allow the Analog Discovery signal wires to be connected to component leads, wires, and other circuit components.

The Xilinx Zynq®-7000 All Programmable SoC Mini-ITX Development Kit provides a complete development platform for designing and verifying ...

Features Single Winding, For Signal Switching,Bifurcated Contact ,Maximum Switching Capacity 4.2A 700 VAC

Mini-Relay DPDT 2vDC, 8Pin 1A - For signal switching,Bifurcated Style,Ultra high sensitivity,Surge strength 1500 V

This plate enables end-to-end mounting that makes up the Mini V system. Works with the OpenBuilds Mini V Wheels and the Xtreme Mini V Wheels

You can use this Mini V Gantry to ride on any 20mm side of the V-Slot rail system.

These shims can be used for spacing on many applications, including in the Mini V Wheel Kits.

Primarily designed for Dragonboard 410c

An iPad app that automatically connects to Max and mirrors your interface.

ARM-Powered Ethernet System-on-Module

Modulowo® Explore™ E is development board for Intel® Edison designed for easy development of Internet of Things projects (IoT)

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin Molex connector wit...

Cellular IoT module supporting LTE-M and NB-IoT

Node-red integration - simply build your own flows for your Voice Channel and define what happens whenever Moni hears your trigger pattern

The best motor controller you can buy for your Raspberry Pi