Hardware and Software products

The EM1000 is a full-featured Tibbo BASIC/C-programmable IoT Module with Ethernet, as well as optional Wi-Fi* and GPRS** connectivity.

The EM1000 is a full-featured Tibbo BASIC/C-programmable IoT Module with Ethernet, as well as optional Wi-Fi* and GPRS** connectivity.

The EM1000 is a full-featured Tibbo BASIC/C-programmable IoT Module with Ethernet, as well as optional Wi-Fi* and GPRS** connectivity.

The EM1001 is a full-featured Tibbo BASIC/C-programmable IoT Board with Ethernet, as well as optional Wi-Fi* and GPRS** connectivity.

The EM1001 is a full-featured Tibbo BASIC/C-programmable IoT Board with Ethernet, as well as optional Wi-Fi* and GPRS** connectivity.

The EM1206 is a compact Tibbo BASIC/C-programmable IoT Module with Ethernet, as well as optional Wi-Fi* and GPRS** connectivity.

The EM500 is an ultra compact Tibbo BASIC/C-programmable IoT Module with Ethernet and optional Wi-Fi* connectivity.

Deep Learning-based Emotion Recognition software that reads facial micro-expressions in real-time.

Narrow type, for 3 small modules (e.g. Mini Battery, Core and Mini Cover Modules).

Loaded with sensors for air and weather, colour and light, and sound, and slots right onto your micro:bit.

USB-Powered, Low Priced, Open Source RF Signal Generator

ESPectro Base complements ESPectro Core for more GPIO, a lot more analog signal, and more breakouts.

Gain control of ESPectro Base's portability and ESPectro Core's boost of power with ESPectro Core + Base.

An Arduino shield with our 40 pin expansion header - to allow you to add your own custom hardware on top of Esquilo.

The W5500 Ethernet expansion board is a new member of the DFRobot Ethernet family. It integrates PoE power supply and a W5500 Ethernet chip.

A solution that enables the 96Boards to be powered over Ethernet

Designed to work together when powered up using Ethernet communications

A low noise, low distortion, fully differential amplifier with a selectable power mode

Dual 24-bit sigma delta converters on chip

The EVAL-ADXL100xZ is a simple evaluation board that allows users to quickly evaluate the performance of the ADXL1003 vibration sensor.

A Control Board for iMOTION™ Modular Application Design Kit (MADK) platform

Evaluation board for supporting customers during their first steps of designing applications

The world's smallest 45 V microstepping motor driver rated at 2.5 A

Exitum API for networking and communications!

Everything you need to get started with Explorer HAT Pro or Explorer pHAT!

EXT.IO is a unit used to expand I/O port. It integrates PCA9554PW.

The EZ-B IoTiny can be controlled over WiFi using the graphical ez-builder software on your PC or mobile device, without needing to program.

A portable extension board allowing you to program conveniently anywhere, anytime.

An embedded flow meter totalizer module.

An embedded oxidation-reduction potential (ORP) sensor module.

Embedded color sensor

The FAN53703 is capable of delivering a peak efficiency of 93%, while maintaining efficiency over 90% at load currents as low as 1 mA.

The FAN54511` family of chargers includes an I2C controlled 3.2 A USB-compliant switch-mode charger.

FAN65004B is a wide VIN highly efficient synchronous buck regulator, with integrated high side and low side power MOSFETs.

FAN65005A is a wide VIN, highly efficient synchronous buck regulator, with integrated high side and low side power MOSFETs.

FAN65008B is a wide VIN highly efficient synchronous buckregulator, with integrated high side and low side power MOSFETs.

Fully automated, hyper-local food production has never been so attainable.

This 8-bit non-inverting translator uses two separate configurable power-supply rails.

This ADKey board with 10 keys can be used to drive your DFPlayer Pro, DFPlayer Mini, or Voice Recorder Module...

The LIS2DW12 is a low-power high-performance three-axis linear accelerometer, featuring low power(50nA), low noise(1.3mgRMS), 32 FIFO...

DFRobot TCS3430 XYZ Tristimulus Color Sensor employs the new generation of TCS3430 spectral sensor IC launched by the well-known AMS company

A .NET Gadgeteer mainboard running .net Micro Framework

Support virtually any Layer 2 or Layer 3 protocol

Support virtually any Layer 2 or Layer 3 protocol

This 24×8 LED Matrix display is special designed for FireBeetle series. It supports low-power consumption mode and scrolling display.

The Firefly is a breakout board designed to inspire, build and develop from scratch any Internet of Things application.

Raspberry Pi LED Buzzer Board.

The flanged lip on this Bearing will catch on the outside of a 16mm hole on any plate. Eliminates the need for recessed holes.

These are the clamps we use to firmly hold the Flexible Corrugated Tubing for short wire runs on our builds. The rubber lining holds the tub

Swipe, tap or flick your wrist to control your Raspberry Pi with the Flick HAT.

Spice up your Flick Zero and Raspberry Pi Zero with a stylish white and orange Flick Zero case!

Easily connects flow meter to Atlas EZO™ Flowmeter Circuit.

FlowPaw is a new coding kit that makes it easy for anyone to learn programming by making their own gadgets and gizmos.

Four 14-segment displays that you can use to display text, numbers, and a host of other characters.

Open hardware for sound-based projects using your own custom sound content. Perfect for toys, games, cosplay, art projects, and robots.

A low cost development platform for Kinetis K66, K65, and K26 MCUs

The FSUSB242 is a switch that provides high voltage and surge protection for the HSD+/HSD- lines.

Makes it easy to automate relays unlike any other controller in the world

Add more relays to your Fusion series dual interface relay controller

Fusion for ARM development board integrates first-ever embedded debugger/programmer over WiFi. Enjoy cable-free world!