Hardware and Software products

Our maker friendly Arduino dev kit has a LiPo battery charger, monitor, & two RGB LEDs built in for $25 & is smaller than two US quarters

Next-generation virtual reality

DK2 is the latest development kit for the Rift that allows developers to build amazing games and experiences.

Prevent small leaks from becoming costly disasters with this ZigBee device by getting instant alerts on your smartphone when moisture is det

A programmable mixed-signal matrix that can implement a wide variety of mixed-signal functions in a single, small, low-power device.

This chip is like a rotary switch - it internally routes the common pin to one of 16 channel pins, and works with digital or analog signals.

The Copernicus II is a great GPS module from Trimble, but the SMD module prohibits immediate gratification. This DIP allows the customer ...

TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Rin...

The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC

Description: The NCP1402 is a 3.3V DC-DC converter. The breakout board will accept voltage inputs between 1 and 3 Volts (such as 1 or 2 A...

The Trenz Electronic TE0802 is a development board integrating a Xilinx Zynq UltraScale+

Object based IoT hub running on low cost Raspberry Pi devices. Allows users to create IoT edge infrastructure with no programming required.

A Wi-Fi client and access point to embed into your projects!

The TinyFPGA BX is a small FPGA module with all of the components and circuitry required for the FPGA to function taken care of for you

UP 4000 is the next generation credit card sized successor to our UP Boards series.

W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5500

Measure real CO2 levels with our PAS CO2 Shield2Go

Acts as a female-to-male gender changer for a 2x6 pin female header or cable.

A 5-megapixel camera module for UDOO, sensitive to infrared light (no IR filter).

PowerBoost 1000C is the perfect power supply for your portable project!

myCobot/myPalletizer- Adaptive Gripper

Here is our ADS1292R Arduino shield that will let you read ECG and respiration data using Processing in real time!

A framework that makes it easy to write applications that discover—and communicate directly with—nearby devices.

The ADP5250 brings higher sample rate and bandwidth and a more rugged design to the Analog Discovery Pro family

An open source operating system for connected IoT devices that use 32-bit micro controllers of various architectures. Includes full BLE 4.2!

The Arduino USB Host Shield allows you to connect an USB device to your Arduino.

An entry-level artificial intelligence suit integrating vision, positioning and grabbing, and automatic sorting modules.

AT&T M2X is a highly secure and scalable time-series data storage for network connected devices.

Works with OpenBuilds V Wheels! These are the same bearings that are included with the OpenBuilds V Wheel Kits.

The Base Board is the host of multiple hardware combination of Shields defined for the IoT application hardware implementation.

Get started with the Notecard and the Feather with this kit. Includes a Notecarrier-AF, a Adafruit Feather ESP32, and a cellular Notecard.

H23R10 is a Bluetooth/BLE module based on Laird BT900 and STM32F0 MCU

This shield gives the Arduino CAN-Bus capability. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connecti...

COLOR is color recognition unit with integrated TCS3472 chip.

The ideal storage solution

A low-cost hardware platform that enables design and debug of the PSoC 4700S MCU.

DeviceHub.net is an IoT platform that allows makers and companies to easily connect their Internet-enabled hardware projects to a dashboard.

H04R20 is a compact coin-cell lithium battery holder that fits two CR2032 batteries in series

Different size wire: 4.72 inch,6.29 inch,7.87 inch,9.84 inch,many kinds of colors and sizes can do all kinds of circuit experiments.

with UNO R3, Line Tracking Module, Ultrasonic Sensor, Bluetooth Module

100% compatible with Arduino and most shields designed for the Arduino

ESP-EYE is a development board for image recognition and audio processing, which can be used in various AIoT applications.

gen4 3.5" Diablo16 Intelligent Display Module Resistive Touch, without Cover Lens Bezel

gen4 5.0" Diablo16 Intelligent Display Module Capacitive Touch, with Cover Lens Bezel

gen4 7.0" Diablo16 Intelligent Display Module Resistive Touch, without Cover Lens Bezel

The GPS Module can detect your Tessel's global position! It features up to 1.8m accuracy, 66 search channels, 22 tracking channels, -165d...

GPS is a module built in small GPS module. The small GPS module named UBLOX NEO-M8N.

This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.

this sensor exhibits lower power consumption, higher resolution and higher sampling rate.

DFRobot BME680 Environmental Sensor is a low power gas, pressure, temperature & humidity sensor based on BOSCH BME680 sensor.

This encoder is matched with 2wd miniQ Robot chassis.

4 digit red alpha-numeric display Grove compatible 8 adjustable luminance levels

Base Shield provides a simple way to connect with Arduino boards and help you get rid of breadboard and jumper wires.

This Grove-Infrared temperature sensor is a non-contact temperature measure model.

The Grove - Infrared Temperature Sensor Array (AMG8833) is a high precision infrared array sensor which based on advanced MEMS technology.

Grove-Gas Sensor (O₂) is a kind of sensor to test the oxygen concentration in air

Connectivity between your Arduino and your iPhone made simple.

The joint test action group (JTAG) HS2 programming cable is a high-speed programming solution for Xilinx FPGAs.

Uses a unique technology - the so-called memory display developed by Sharp

Everything you need to get started with IoT networks: an Arduino computer, LoRa Radio and Grove sensors. Powered by solar and battery.