Hardware and Software products

Raspberry Pi 3 B/B+ microSD card image. Standard Raspbian with added MQTT, Node-RED and Radio Gateway.

If you are gonna build a robotics project, then you need to check out this guy, Black Gladiator.

An Arduino which is IoT ready.

DRV8711 BoosterPack

The MXP Breadboard provides a 300 tie breadboard & 50 tie bus bar on an expansion card compatible with the myRIO Expansion Port (MXP).

Use to trigger various actions

DSPs from Texas Instruments

CC3220SF LaunchPad

A gas sensor for measuring the carbon dioxide (CO₂) concentration

M5Stack Official Connector Grove2Grove Grove2Pin Grove2SERVO 5pcs a set Three kinds Optional Grove to GROVE/PIN/SERVO

An accurate probe for general pH measurements.

Create programmable projects with conductive tape on a brick building system or as a wearable with conductive thread!

With 3 different Pmod inputs, 8 finger buttons, and power tied all throughout the ruler, measuring distances will never be the same again!

Laboratory grade probe for measuring dissolved oxygen (DO).

Designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current.

Eddystone is an open beacon protocol that defines a Bluetooth low energy (BLE) message format for proximity beacon messages.

Educational robotics kit for building your own customizable linux-based Mobile Inverted Pendulum (MIP)

Chip L298N, Dual H bridge drive (can drive 2 DC motors), driving ability, low heat, strong anti-interference ability.

Free tutorial in CD, better price, better service

It is a development kit based on an AM335x processor which integrates an ARM Cortex™-A8 core operating at up to 1GHz.

Continuously stream temperature, humidity, pressure, and movement data using dim light.

The SIGFOX shield evaluation board demonstrates the AX-SFEU, a single chip solution to create an ultra low power node on the Sigfox network.

FireBeetle Covers-Gravity I/O Expansion Shield is an adapter for Gravity sensors and modules.

Flymaple is a Quadcopter controller board, based on the Maple Project. The FlyMaple embeds a STM32F103RET6 (ARM Cortex-M3) as it's main MCU.

FreeSoC2 Development Board, SparkFun’s take on the PSoC 5LP ARM Cortex-M3 and delivers it as an Arduino compatible kit.

The Gear Stepper Motor Driver Pack includes a stepper motor and a motor drive board.

gen4 5.0" Diablo16 Intelligent Display Module Resistive Touch, without Cover Lens Bezel

Light sensors are probably one of the most common sensors in life, they can be found in your laptop, phone or home lighting system.

This is an Arduino CO/Combustible Gas sensor. It uses MQ-9 to dectect Carbon Monoxide.

An analog output pH monitoring meter.

An analog output pH monitoring meter kit.

This UV Sensor with GUVA-S12SD chip is suitable for detecting the UV raditation in sunlight.

This arduino digital capacitive touch sensor provides a one-touch style switch on your Arduino project.

This weight sensor kit is equipped with all the accessories needed to build the scale which reduces the difficulty of structure construction

Gravity I2C SD2405 RTC module. This is an extremely accurate I2C real-time clock (RTC) with crystal compensation, inner chargeable battery.

The Grove - 16-Channel PWM Driver is based on NXP PCA9685, which is a 16-Channel, 12-bit I2C PWM driver.

This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C.

10 Leds Arduino Library Easy-to-Use

The Grove-Mech keycap is a mechanical switch with a build-in LED. The 255 full color RGB LED makes it simple and easy to show the statues

There are only two weeks away from Valentine‘s Day! We've specially prepared a demo using Red LED matrix and full step-by-step tutorial to l

A Grove Shield for micro:bit v2.0 with 4 Grove ports

Instead of using coil, packaged solid-state relays(SSR) use power semiconductor devices such as thyristors and transistors

Grove Water Sensor

Single high-speed voltage comparators

In this design, we dedicated the last GPIO (GPIO.3) to a buzzer for alarm notification applications.

Designed to get student ready for Industrial IoT applications

The JeVois-A33 smart machine vision camera combines a camera sensor, embedded quad-core computer, and USB video link in a tiny package.

The JustBoom DAC pHAT is a plug and play, high resolution, digital-to-analog converter for the Raspberry Pi Zero and Pi Zero W.

Kinetis KW41Z is supported by a rich set of software enablement, including MCUXpresso Software and Tools.

A high-intensity laboratory-grade probe for measuring pH.

Description: The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single b...

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another.

The complete kit to assemble and start training your LittleArm

LoRa Arduino Shield is an extension for Arduino to send data over long distances with extremely low data consumption.

14 SIZES! Compared to most screws, they are ultra low profile. This means plenty of clearance.

The Lux Meter Tag uses a high dynamic range light intensity sensor OPT3001 that can measure illuminance from 0.01 to 83,000 lux.

Send - receive data using web requests REST/SOAP, SSL Secure connections, 10 data channels, unlimited values, shared resources

Ultra-Low Power, Single Channel Integrated Biopotential (ECG) AFE with HR Detection Algorithm (R-R)

An integrated sensor platform that helps customers evaluate Maxim's complex and innovative medical and high-end fitness solutions.

The Base securely holds four Modulos and connects them together. Need more than four? You can daisy chain Bases for larger projects.