Hardware and Software products

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The SparkFun Inventor’s Kit (SIK) for micro:bit is a great way to get creative, connected and coding with the micro:bit.

The SparkFun Inventor’s Kit for RedBot is a great way to get started with two motor robotics and sensor integration using the Arduino pro...

Pogo pins make life so much easier when you are trying to program without having to solder a single thing, and when you attach them to an...

The SparkFun Lumenati 4-pack is a coin-sized board equipped with four APA102C LEDs surrounding the outer edge

The SparkFun Lumenati 90L is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position

The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform

Robots are fun, and the micro:bit is the perfect controller for learning how to build and program robots!

The MicroMod Machine Learning Carrier Board combines some of the features of our SparkFun Edge Board and SparkFun Artemis boards, but all...

The SparkFun MicroMod Teensy Processor leverages the awesome computing power of the NXP iMXRT1062 chip and pairs it with the M.2 MicroMod...

The SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the other peripheral...

The SparkFun OpenLog is an open source data logger

The SparkFun OpenPIR is a highly customizable Passive Infrared (PIR) sensor based around the NCS36000 PIR controller

The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature.

The SparkFun Photon Wearable Shield makes it easy to add the WiFi enabled Photon to any wearables project. Each pin on the Photon is brok...

The SparkFun Photon Weather Shield is an easy-to-use add-on board that grants you access to barometric pressure, relative humidity, and temp

Do you own a Raspberry Pi? Have you always wanted to use it to set up your very own gaming station? The SparkFun PiRetrocade provides you...

The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board.

At SparkFun we continually like to innovate, update, and improve even when it comes to our very own development boards. The SparkFun RedB...

The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Ardiuno...

The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring acceleration...

The SparkFun Serial Controlled Motor Driver (SCMD) is a DC motor driver that’s been designed to drive small DC motors with ease. The SCMD...

The SparkFun Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or log...

The SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand

The SparkFun Stepoko is an Arduino compatible, 3-axis control solution that runs grbl software and is able to connect to your computer to...

This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries.

The SparkFun THAT 1206 InGenius Breakout Board offers an easy solution to adding a balanced audio input to your circuits

Are you frustrated with the lack of dexterity from most third hands? The SparkFun Third Hand gives you the ability to hold a board betwee...

The TRS (tip ring sleeve) jack breakout is a simple board that allows a ¼" stereo audio jack to be soldered on to gain easy access

This is a USB 2.0 type A to Mini-B 5-pin cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, et...

The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity...

The Spartan-3E Starter Board provides a powerful and highly advanced self-contained development platform.

This Spindle/Router LED Light Ring is designed to fit our Router/Spindle Mount.

Navigate a maze. Program a painting. Mimic the solar system. Swim across the water. Have a dance party… The only limit is your imagination.

Adds durable steel threads in wood and particleboard. Great for builds that need hold downs like the Ox.

STEMLab 125-14 has 14bit input / output channels for highly accurate measurement results in professional environments.

An open source stereoscopic camera based on Raspberry Pi

BlueCoin Starter kit

Turn your Raspberry Pi into a professional server

Turn your Raspberry Pi into a professional server

Advanced Universal Digital Input (ADC081C021)

Create electronic music by building your very own synthesizer.

The TB1100 is a DB9F-to-terminal block adaptor.

The TB1100 is a DB9F-to-terminal block adaptor

Open-source. Hackable. Internet controlled. This kit allows you to build your own Telepresence robot out-of-the-box in a matter of minutes

A precise ambient temperature measurement device

A photo relay coupled MOSFET

A relay from optocoupled 3 KW

Unprogrammed Microchip microcontroller type 24FJ64GB002 for Theremino Master

THERMAL is a thermal camera module contains thermopile sensors named MLX90640.

Processing is a free, beginner-friendly programming language designed to help non-programmers create interactive art with code

This is the plate you want when you need the power of NEMA 23 Stepper Motors coupled with lead/acme screws for your projects.

TIMI-130 is a 1.3" full colour IPS smart display instrument that replaces and simulates many electronic parts.

An Arm-based Single Board Computer (SBC), uses Arm big.LITTLE™ technology’s 64-bits processor, low power consumption

The TinyFPGA A1 board is a bare-bones FPGA board in a tiny form-factor.

This TinyLily Sewable sensor board can sense tilt, motion, shock, and vibration in your projects.

Want the smallest possible sewable LED for your project? The TinyLily LED 0402 sports a total size of just 6.5mm x 2.5mm!

This TinyScreen Basic Kit has the bare essentials to get going with the TinyDuino with the OLED TinyScreen!

This kit lets you play games on your TinyScreen with the Joystick TinyplaceholderShield.

Measure accelerations in three perpendicular axes.