Hardware and Software products

Analog Input Board is a PHPoC expansion board for the analog input of 0~5V or 0~20mA.

PBH-101 is equipped with four serial interface to connect and communicate with sensors or equipment which supports RS232, RS422, or RS485.

easy to configure the circuit with soldering

RS422/485 Board (S-type) is a PHPoC expansion board for RS422 or RS485 communications.

RS422/485 Board (T-type) is a PHPoC expansion board for RS422 or RS485 communications.

subwoofer out

Unlock your inner Mozart with Piano HAT, a mini musical companion for your Raspberry Pi!

Protect your lovely 7" Raspberry Pi Touchscreen with this lovely display frame!

The PIC24F Curiosity Development Board (Part Number: DM240004) is a low-cost platform with an integrated programmer and debugger and easy...

The PICO-IMX6 reference design based on the NXP i.MX6 multimedia processor is a purpose-built, small footprint hardware platform equipped...

The PICO-IMX6POP reference design based on the NXP i.MX6 Package-on-Package (PoP) multimedia processor together with the NXP MF0100 Power...

The PICO-IMX6UL-EMMC design based on the NXP i.MX6 multimedia processor is a purpose-built, small footprint hardware platform compatible ...

The PICO-IMX6UL-NAND design based on the NXP i.MX6UL application processor is a purpose-built, small footprint hardware platform compatib...

The PICO-IMX6UL-NOR design based on the NXP i.MX6UL application processor is a purpose-built, small footprint hardware platform compatibl...

The PICO-PI reference design is compatible with Intel Edison and TechNexion Pico modules and add a variety of sensors and connectivity to...

The PicoZed™ Carrier Card V1 supports development of PicoZed-based designs with a platform containing all the necessary interfaces and I/...

The Smart Vision Development Kit builds on the PicoZed™ SOM by providing a carrier card for machine vision applications. This kit provide...

Pi Cubes UO4 Module is providing four universal outputs.

PiGlow is a spiral nebula of 18 coloured, individually-controllable LEDs for your Raspberry Pi.

pin:bit breaks out all of the useful pins from your micro:bit into breadboard format while providing handy-dandy labels

Mobile and Internet of Things hardware device for software developers The Round Solutions PingPong is a modular IoT Hardware Platform.

The Pi PoE Switch HAT Case is the perfect enclosure for our Power over Ethernet Raspberry Pi HAT.

pisound is an ultra-low latency high-quality soundcard and MIDI interface specially designed for Raspberry Pi pocket computers.

The Pi Supply Switch is the solution to all of your Raspberry Pi power management problems.

The PIXI-41Z module is ultra-compact, low power high sensitivity module and supports Bluetooth 4.2, 802.15.4 and Thread communication.Ava...

A great bundle of things you need to get up and running with the new Pi Zero W!

Access serial ports over Ethernet!

Enables you to easily access serial devices located on a remote NetBurner device

3.7v LiPo Battery Power Supply Solar (MCP73831, PAM2305 & XC9141)

2G/3G Cellular to Cloud Pack with STM32L496AG MCU

A turnkey development platform for cellular and cloud technology based solutions

These connectors will help build the various shape of Aluminium-Profile frames.

These connectors will help build the various shape of Aluminium-Profile frames.

These connectors will help build the various shape of Aluminium-Profile frames.

PLC Data Insights & Sensor Alerts provides email alerts and web-based sensor and diagnostic monitoring for the Siemens SIMATIC S7-1200 PLC.

PLC is a Base for an industrial application.

Developers can now easily build connected products without worrying about power management, batteries, or networking.

PLUS is a enhanced module including battery, gear potentiometer, IR transmitter, PORT B(GPIO Port), PORT C(UART Port) and MicroPhone Pad.

The Pmod 8LD has eight high-brightness LEDs that are driven by logic level transistors.

With the Pmod Adapter for myRIO, you can now connect your myRIO to the expansive selection of Pmods offered by Digilent.

With the Pmod Adapter for roboRIO, you can now connect your roboRIO to the expansive selection of Pmods offered by Digilent.

The Pmod AMP2 is a low power audio amplifier through the use of the Analog Devices SSM2377.

The Pmod AMP3 uses a 2W Class-D audio power amplifier, allowing users to provide stereo audio through either I2S or TDM.

Useful for securely attaching a Pmod to your project or application.

The Digilent Pmod CMPS2 is a digital compass module using Memsic's MMC34160PJ magnetometer.

The Pmod CON4 allows users to connect their system to two RCA audio jacks.

The Pmod DIP is a 12-pin dual in-line package that includes a 2x6 female header, allowing users to easily separate and process signals.

The Pmod ENC features a rotary shaft encoder with an integral push-button to provide multiple types of outputs.

The Pmod IA provides users with a way to measure the electrical impedance of a circuit.

The Pmod JSTK is a 2-axis joystick module with three user push buttons.

The Pmod JSTK2 is a versatile two-axis joystick that can be easily incorporated into a wide variety of projects.

The Pmod NIC100 is designed to provide a complete Ethernet interface featuring the Microchip ENC424J600 stand-alone Ethernet controller

The Pmod RF2 adds RF communication through the Microchip MRF24J40 IEEE 802.15.4 2.4GHz RF transceiver module.

The Pmod RJ45 connector modules can offer an extended wired connection between two different systems. Shipped as a pair of male & female.

The Pmod SF provides users with 16Mbit of non-volatile memory through the use of ST Microelectronics M25P16.

The Pmod SF2 is a 16 MByte serial PCM memory module, the Micron P5Q PCM.

The Pmod SF3 provides users with 32 MB of non-volatile memory through the use of Micron's NOR Flash memory (N25Q256A)

The Pmod TPH offers 6 external pin headers so that users can easily test the GPIO signals passing through each of the pins.

The Pmod TPH2 offers 12 external pin headers so that users can easily test the GPIO signals passing through each of the pins.

A ready-to-start device that combines a Microcontroller, Color OLED, SD card reader, 3 Buttons, RGB-LED, Charger&possibly a WIFI module.