With USB-C Type, not only USB communication but also Ethernet!
Explore the CAN features of your Arduino boards and create your communication network, with this easy-to-make Open Source shield.
Unlock the full potential of your Flipper Zero with the Electronic Cats CAN Bus Add-On.
The Temperature Card is a wearable XIAO and SSD1306-based device that displays the current temperature using an SHT40 sensor.
In this short tutorial, we will setup a portable digital TV by Seeed Studio reTerminal and E10-1 Expansion Board
This project tutorial will show you how to implement a Fiber Optic Cable fault detection system with machine learning, Blues & Qubitro.
A wall-mounted display that shows text messages, so you can leave notes for your loved ones.
The Ripple Qwerty pager firmware has now been ported to the T-Display S3 Touch board, redesigned with a nifty touch UI!
Use a Particle Photon 2 to show ads that change over time thanks to Asset OTA and collect impression metrics
A beginner-friendly project for using ChatGPT on an ESP32!
Amazon's Alexa is boring, so we gave it some animatronic eyes and a CRT mouth. Now my kids won't leave it alone!
We extended the capabilities of ChatGPT to robotics and controlled multiple platforms such as robot arms, drones with language.
How I created a $10 ESP8266 GPS Tracker that uses Open Wi-Fi networks & DNS exfiltration for communication.
I like arcade buttons most among buttons of all kinds. And Lately, I've been doing sports. Can I combine them together? Yes, sports buttons.
Use a Raspberry Pi and OpenAI to have casual conversation with your "Friend Bot"!
AfterMarket add-on that will help your bike not only stand out but help you track whether you are on time
A wide range RF detector 50-3000Mhz with battery charger, ATtiny micro controller and SMD.
In this project we are going to connect and configure a PCIe WWAN modem to a Zynq MPSOC using Petalinux and the Genesys ZU 5EV board.
Based on Mario Levrero's short story published in 1970, this conceptual machine has a simple purpose
This project shows how to use an lwIP server on the SP701 to be able to send it commands/data on a local area network (LAN).
Using Vivado's built in AXI wrapper tool, this project goes over how to add an AXI4Stream interface to a custom FIR filter in Verilog.
A TinyML based wearable using Edge Impulse software to detect the tablet consumption action.
Send text messages using the Raspberry Pi Pico and a cellular Notecard from blues wireless.
Here's how to connect your phone to a LoRa module using standard components you can buy everywhere, along with an example chat program.
