I2C Signal Decoding/Debugging using Siglent SDS2102X Plus and SDS1104X-E Oscilloscopes
Debugging in hardware can be challenging but in this project we are going to learn how to debug effectively in hardware.
In this project we will examine how we can use internal logic analysers to validate a Versal Edge Image Processing application.
A simple to make AD9833-based bench signal generator, suitable for 10Hz–1Mhz - for actual practical use.
This project walks through how to setup the Vivado & Vitis projects for debugging using integrated logic analyzers in HDL in verison 2023.2.
Enhance IoT device and application performance, optimize power efficiency, and speed time-to-market with this cross-platform tool suite.
Arduino and real-time charts in Excel
This Tachometer very precise. it measures too fast or slow RPMs and it can be used to measure engine RPM or any thing.
Sense or generate change-of-state instances with the Analog Discovery 2's 16 channel I/O.
A cross-platform serial monitor and plotter in one. Inspired by the Arduino IDE, but with more features.
Lot of wires turning to 2 wires
GUI for visualizing real-time data from UDOO sensors.
Will show you how to use AD2 to debug the UART protocol.
Rainfall Measured Using Arduino
In this tutorial, you will learn how to solve bugs using WisBlock, Visual Studio Code and PlatformIO with simple examples.
A Survey on Pollution Monitoring Using Sensor Networks
The Arduino doco could easily lead you to believe that Arduino Due does not support JTAG hardware debuggers. Not true, read on...
Diluting Electric Paint. How to do it, and what the consequences are.
Microcontrollers( Introduction)
You need Arduino UNO and Python 3. Even you can use Python 3.10 (Beta). It is a quite simple project.
This is a replacement development PCB to replace a breadboard.
Powerfull 150 kHz oscilloscope, spectrum analyser, waterfall spectrogram and cross-correlation function on an Arduino using only Python 3
Transform a Raspberry Pi into an SWD debugger/programmer for nRF52 microcontrollers using OpenOCD and `adafruit-nrfutil`.
This blog contains all the necessary information required to debug your TensorFlow Lite for Microcontrollers applications.
