Off-Grid GPS Messaging! Track People, Pets & Things - IP65-rated waterproof case the size of a credit card, no SIM card required!
Will guide you to build a Radiation mapper device with DFRobot Beetle ESP32 C3 and Geiger Counter.
Discover Minino, the ultimate network security device designed for both enthusiasts and professionals.
This mobile weather station, based on Particle's new Monitor One kit, transmits live weather/location information over LTE.
Cellular-based system for tracking the location of an asset, sending GPS data to the cloud and using geofencing to issue SMS alerts.
Build a simple GPS logger in under fifteen minutes using XOD, a visual programming language for microcontrollers.
Protect your loved ones with a climate-aware tracking system for epinephrine!
Build a complete indoor asset tracking IoT solution using the Blues Wireless Notecard, an ESP32 host MCU, the Notecarrier-F, and Datacake.
I built a GPS tracker that monitors my kids’ location, and gives them the ability to request a pickup.
Learn how to use Adafruit. io, GPS, and a Blues Wireless Wi-Fi Notecard to map an outdoor space.
Sound the (silent) alarm: anti-theft alerting & asset recovery with a Blues Wireless Notecard.
Learn how to build a low-cost (and low-code) GPS + Cellular enabled IoT asset tracker that can span the entire globe.
Build a GPS-enabled tracker with just a few lines of code to a Blues Wireless Notecarrier, and visualize it with IoT platform Datacake.
Introducing the next iteration of the Ripple LoRa QWERTY Messenger project, now with GPS support!
Build a small device that can track a bike's movements and then display that data on an Avnet IoTConnect dashboard.
Build a car hacking spy device to remotely read and send CAN commands and track GPS location. All based on open source software/hardware.
An ultra low-power GPS tracker with S.O.S alert button, tracked over a LoRa mesh network.
Meshtastic is a project that lets you use inexpensive ($30-ish) GPS radios as an extensible, super long battery life mesh GPS communicator.
A Soracom GNSS tracker with motion detection, data visualization, and rule-based alerts.
In part 1, I showed how to set up a simple LoRaWAN gateway. Now I’ll demonstrate how to use end devices in a real LoRaWAN application.
How to connect Sony Spresense board with The Things Network using LoRa.
Sightsee at your pace. Just plug in your headphones and go.
Keep track of your buddy's location in the water without having to radio in and get their direction.
This is a GPS enabled audio player for a friend's new hilarious project where comedy meets tourism. This is a fake walkie-talkie.
