This project can identify Basic Logic Gate ICs, viz. NOT, AND, NAND, OR, NOR and XOR using Arduino
This is a miny gaming console made out of scratch, I used a tin box from Impact Mints and an I2C OLed along with Wemos D1 (esp8266).
Running short on pins? Don't waste pins, work with a I2C LCD instead.
Using Arduino and ATtiny85, send and run MIDI signals to Arduino through MIDI communications.
This is project with the arduino i2c module tmp102 for measuring temperature. The
A hardware tour of various Linux driver subsystems.
BH1715 is a digital Ambient Light Sensor with an I²C bus interface. The BH1715 is commonly used to obtain the ambient light data.
Turn the inexpensive but flexible LPC845 (ARM M0+) into an I2C co-processor to offload hard real-time requirements on complex systems.
This is about a little library I have written to use I2C EEPROMs as a file storage on Arduinos, ESPs, and other microcontrollers.
This project is what I did in my free time last year. I hope that it can give you a demonstration of the applications of the STM32 Board.
MCP23017 BoB with DIN rail mounting and proper wire to board connectors and indicator LEDs.
The PTHAT has been designed primarily to fit and work with the Raspberry Pi, it can also be used with other MCUs such as the Arduino boards.
Fetch information from a web page to control a bookcase light and display message strings without needing a web server(port f. ) via ESP8266.
Learn how to read data from an MPU6050 accelerometer/gyro sensor and control LEDs with your Meadow F7 Micro board using Meadow. Foundation.
This project born as add-on for my intercom, and implement a retro camera for electric wheelchair.
I²S(Inter-IC Sound) output FM tuner using ESP-01 with RDS and IR remote control. 100% pure digital music output at upto 48ksps. Enjoy!
Zakhar is a robotics UX project. The main aim is to decrease the anxiety of users interacting with a robot.
Simple FM stereo receiver based on QN8035 for Raspberry Pi.
This program demonstrates the use of reading an ADC Channel value and displaying it on an I2C 7-Segment Display
High contrast and ease of use make it a perfect I2C LCD display for Arduino and Raspberry Pi.
A 3D-printed hand-movement controlled Thanos Infinity Gauntlet which does not need superpowers to 'balance the universe. 😏
Using a ATmega328PB as I2C dual port memory, for communication between EV3 and NXT.
Access GPS via I2C on the Raspberry Pi
