This project walks through how to implement a simple FIR filter with pre-generated coefficients in Verilog.
Combine a Raspberry Pi and an inexpensive SDR (Software-Defined Radio) dongle to create a remote spectrum monitoring device.
This project walks through how to get started with the RTL-SDR on Mac OS 14
DDS (Direct Digital Synthesis) Analog Devices AD9959 4-Synchronized Channels DDS Arduino Shield for Arduino MEGA 2560
The way to create a high-precision generator from 100 kHz to 600 MHz based on DDS from Analog Devices - AD9910.
This project walks through how to set up the Ettus B205 mini SDR with Gnu Radio on an Ubuntu host PC.
This project talks though the signal processing behind the GNU Radio flowgraph for receiving and demodulating FM radio broadcast signals.
This project walks through basic RF testing for hardware/software verification of SDRs on the Ettus B205mini USRP.
An extremely simple way to make a stand-alone quality SDR radio with professional capabilities and features.
This project walks through basic RF test measurements using the Zmod Digitizer with WaveForms from Digilent.
This project walks through how to get started with the Ettus USRP b205mini on Mac OS 14.
Make a complete FM radio with stereo and RDS capability based on the single chip FM receiver RDA5807
A walk-through of the basics of using a matched filter in software defined radio (SDR) using GNU Radio with the B205mini USRP.
This project walks through how to use a Zmod Digitizer with WaveForms to make measurements that validate basic modulation schemes.
This project walks through how to measure spurious outputs from a DDS chip to gauge the amount of quantization error of it.
Will introduce about the Red Pitaya and it's capabilities.
