This tutorial shows how to use the INA226 Voltmeter with a GC9A01 Display in Visuino to measure and display voltage in real time.
This very simple and inexpensive circuit will reset the fuses on a bricked ATtiny chip. Once programmed, no Arduino is required!
This is a musical Tesla Coil driven by an Arduino and Slayer-Exciter. Using an Arduino, you can play music with pure electricity!
Open source Smart energy monitor with some new features like Terminal Commands, Readings Logger, and Data Plotting.
This deviceis in every respect superior to the original Plasma Rife machine, mainly thanks to today's level of development of Electronics.
Use Arduino and Raspberry Pi to get notified if a hot water heater pilot light goes out.
DC-DC Buck Converter to step down voltages from 55V max to 1.2V-55V
Measure the unknown resistor with a simple configuration!
Protect lithium polymer battery pack from over discharge.
Python library for Raspberry Pi which provides an easy to use interface for the INA219 voltage and current sensor from Texas Instruments.
For its making I will use components that can be easily obtained.
Simple to build Mini Tesla coil with relatively low consumption, and surprisingly good results.
In this project I will show you a simple voltmeter with an ESP8266 mini D1 pro with an OLED screen SH1106 with 2 resistors.
Arduino and Python-based project that will help us read the sensor values and plot it on MATLAB.
A basic project for understanding the ohms law and its implications in the electronic field.
This project demonstrates how easy you can use the DMMShield from Digilent with all Arduino boards.
Electrical energy is crucial in our lives, and it is very important to know how we use it in order to be aware of how to do it prudently.
In this project, I will show you how to build a powerful tool that can generate up to 90kV with high current, orange plasma.
An interesting project that describes how to make several useful devices using a CFL bulb ballast, with minimal modification.
Learn how to use an Arduino to measure voltage, current, and resistance.
Georges Lakhovsky was a Russian scientist wich is best known for his work on device he claimed could cure many diseases
How to read the value of a Tubolar Stretch Sensor with your Arduino.
Measure the juice left in your AA or AAA batteries anytime using an Arduino Uno and a couple of jumpers.
This Tesla Coil has been modified so that the spark "sings" melody generated by a sound source.
