Turn your RPi 3/4 into an App Store Enabled Router

1.) Download Pantavisor for your Raspberry Pi

You can download the Pantavisor images and the most up to date instructions at https://one.apps.pantahub.com/#2.) Download and install Raspberry Pi ImagerYou can download the imager from: https://www.raspberrypi.org/downloads/Follow the instructions there to install the imager3.) Flash Pantavisor image to SD Card

• Launch Raspberry Pi Imager
• Choose the file you downloaded in Step 1
• Select your SD card or USB reader and click WRITE

WARNING: This will wipe all data on this card

Note: The flashing process could take a while4.) Start using Pantahub One

• Remove the SD card from your computer and put the card into the Raspberry Pi
• Plug your Raspberry Pi to wired Ethernet and a strong enough power source
• After about 1-2 minutes your Pi will be up and you can connect to the WiFi hotspot:

Network SSID: Pantahub-One

Password: pantahubone

• You are all set! Start installing Apps and using your Raspberry Pi.

5.) Go to https://one.apps.pantahub.com/ and login to manage your device, install apps and more.