Published June 24, 2020 © LGPL

Arduino Rotating Platform Based on NEMA17

A NEMA 17 stepper motor based Rotating Platform for capturing fancy rotating videos.

IntermediateFull instructions provided5 hours5,653

Things used in this project

Hardware components

SparkFun Stepper motor driver board A4988

NEMA 17 STEPPER M

attiny dev board

Arduino Nano R3

UTSOURCE Electronic Parts

Software apps and online services

Arduino IDE

Autodesk Fusion

Hand tools and fabrication machines

3D Printer (generic)

Story

I saw a 28BYJ-48 5V Mini Stepper Motor Rotating Platform and want to make it but I didn't have 28BYJ-48 so I made my own version of that rotating platform.

But WHY MAKE A ROTATING PLATFORM!?

GOAL was to make a rotating platform which can be used to shoot stuff like this-

BASIC things about BASE STRUCTURE

This is Version 1

this version is not a proper encloser and has few issues which I'm gonna solve in V2.

first, I designed the basic body according to these gears I found on Thingiverse,

https://www.thingiverse.com/thing:43090

Thanks UTSOURCE.net to offer electronic components for this project!

you can check UTSOURCE.net, they deal in all kinds of electronics components like for example Attiny84, stepper motor driver which I'm using in this project, and many more.

these are the 3D printed parts that were needed - (for V1)

BASE
BIG GEAR
SMALL GEAR
BIG GEAR PIN
PIN
Paper Holder x2

I Designed these parts in Fusion360 and 3D printed them with 40% Infill to provide EXTRA STRENGTH because I'm using PLA, ABS or PET G is a suitable alternative.

assembly is pretty straight forward, I just put everything together like a custom lego.

This is the V2 which have a better encloser with mounting holes for mounting it to a wooden base with these L brackets-

also, I've made these paper holder brackets which will hold any a4 size paper which will then become the background, you can add different color papers to get the different backgrounds to suit your video.

The final setup will look something like this -

ELECTRONICS and Wiring-

FOR NOW, I'm using an Arduino NANO as the main controller along with a4988 stepper motor driver to run this system.

(in version 2, I will use an Attiny84 to run this setup)

this board which I made a few weeks ago (PCB was provided by JLCPCB)

A4988 Stepper motor driver will do the job smoothly

wire everything according to this scheme-

after wiring

upload this test code and you're basically done-

The Updated Circuit-

I've attached my custom Attiny84 breakout with A4988 Driver on a perf board with some female headers.

it's small and minimal, so I put it inside the V2 encloser and tested it.

Schematics

Code

TEST code

// defines pins numbers
const int stepPin = 3; 
const int dirPin = 4; 
 
void setup() {
  // Sets the two pins as Outputs
  pinMode(stepPin,OUTPUT); 
  pinMode(dirPin,OUTPUT);
}
void loop() {
  digitalWrite(dirPin,HIGH); // Enables the motor to move in a particular direction
  // Makes 300 pulses for making one full cycle rotation
  for(int x = 0; x < 10000; x++) {
    digitalWrite(stepPin,HIGH); 
    delayMicroseconds(500); 
    digitalWrite(stepPin,LOW); 
    delayMicroseconds(500); 
  }
  delay(1000); // One second delay
  
  digitalWrite(dirPin,LOW); //Changes the rotations direction
  // Makes 300 pulses for making two full cycle rotation
  for(int x = 0; x < 10000; x++) {
    digitalWrite(stepPin,HIGH);
    delayMicroseconds(500);
    digitalWrite(stepPin,LOW);
    delayMicroseconds(500);
  }
  delay(1000);
}

Credits

Arnov Sharma

305 projects • 305 followers

Just your average MAKER

Arduino Rotating Platform Based on NEMA17

Things used in this project

Hardware components

Software apps and online services

Hand tools and fabrication machines

Story

But WHY MAKE A ROTATING PLATFORM!?

BASIC things about BASE STRUCTURE

ELECTRONICS and Wiring-

Custom parts and enclosures

body

big gear

small gear

PIN

paper holder

Schematics

sch

Code

TEST code

Credits

Arnov Sharma

Comments

Embed the widget on your own site

Arduino Rotating Platform Based on NEMA17

Arduino Rotating Platform Based on NEMA17

Things used in this project

Hardware components

Software apps and online services

Hand tools and fabrication machines

Story

But WHY MAKE A ROTATING PLATFORM!?

BASIC things about BASE STRUCTURE

ELECTRONICS and Wiring-

Custom parts and enclosures

body

big gear

small gear

PIN

paper holder

Schematics

sch

Code

TEST code

Credits

Arnov Sharma

Comments

Related channels and tags