Overview
Things
Story
Custom parts and enclosures
Schematics
Code
Credits
Comments(0)

Codrin's Ideas

Published July 8, 2021 © GPL3+

DIY Raspberry Pi ALPR Parking Sys with PlateRecognizer’s SDK

Learn how to step by step implement your own parking system with the use of a Raspberry Pi, Arduino Nano, and Plate Recognizer's SDK.

IntermediateFull instructions provided5 hours4,064

DIY Raspberry Pi ALPR Parking Sys with PlateRecognizer’s SDK

Things used in this project

Hardware components

Raspberry Pi 4 Model B

Raspberry Pi 4 Model B

×

1

Camera Module V2

Raspberry Pi Camera Module V2

×

1

Arduino Nano R3

Arduino Nano R3

×

1

3 mm LED: Green

3 mm LED: Green

×

2

5 mm LED: Red

5 mm LED: Red

×

1

HC-05 Bluetooth Module

HC-05 Bluetooth Module

×

1

Ultrasonic Sensor - HC-SR04 (Generic)

Ultrasonic Sensor - HC-SR04 (Generic)

×

1

Jumper wires (generic)

Jumper wires (generic)

×

1

Breadboard (generic)

Breadboard (generic)

×

2

Resistor 330 ohm

Resistor 330 ohm

×

3

Resistor 1k ohm

Resistor 1k ohm

×

1

Resistor 10k ohm

Resistor 10k ohm

×

1

Pushbutton switch 12mm

SparkFun Pushbutton switch 12mm

×

1

Story

Hello guys!

If you are interested in building your own Raspberry Pi ALPR Parking System, please check out my youtube video first for a short preview of what the project is about:

All the details in regards to the project, the parts used, wiring, code, and how to implement it are thoroughly laid out in the blog:

https://codrinsideas.medium.com/diy-raspberry-pi-parking-system-with-platerecognizers-alpr-8e2254298917

The code/diagrams below are just a few snippets of what you will be learning about how to implement/build in the blog above.

Custom parts and enclosures

Schematics

Code

Credits

Codrin's Ideas

Codrin's Ideas

1 project • 0 followers

Comments