An autonomous RC car that uses a Raspberry Pi 5 to perform lane-keeping along a track, via steering and speed control.
XT-M60 lidar, thinking of it become the most cost-efferency lidar in the world to make everybody could afford to use it in every application
A simple robot that gives easter eggs the ability to run off and hide themselves.
This Arduino-based parking sensor
We converted an RC car into an autonomous vehicle, utilizing a Raspberry Pi 4 and an encoder to provide lane-keeping and speed control.
An autonomous RC car that uses a Raspberry Pi 5, computer vision, and encoder-based feedback to perform smooth lane keeping.
An autonomous RC car that uses OpenCV for lane detection with PD-controlled steering, while an optical encoder regulates speed.
Raspberry pi4 powered autonomous Car that drives and detects blue lane lines and automatically stops at red stop boxes.
Our autonomous car uses a Raspberry Pi 5 to perform real-time lane keeping, speed control, and stop detection for a self-driving experience.
Use OpenCV and a Raspberry Pi 5 to create a lane keeping self-driving car that even responds to stop signs!
This RC car system will successfully self-drive on a track by staying in between lanes, stopping at "Red Lights" and correcting speed.
Project using Arduino Micro and a CC1101 to receive and display the tyre pressures transmitted by a Toyota (Auris Hybrid) and some others
The project was initially designed to acquire real-time race car data for BAJA-SAE competitions.
An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).
NodeMCU ESP8266 in access point mode: the simplest way to make Wi-Fi controlled Robot Car from Bluetooth Arduino Robot Car + Android App.
MeArm mounted on smart robot car controlled by 2 Arduino UNOs
Got a toy you don’t use? Let’s add some ingenuity and hobby skills to make it exciting! Inspired by my Smart Robot Car Kit mods. 🚗✨
This project shows how you can build a car which can be controlled by your smartphone using an android application via Bluetooth.
This tutorial shows you how to connect Raspberry Pi to CAN Bus (e.g. your car), explaining the role of each part and some recurrent errors.
Track ME is a "small" GPS, SD Card, and GSM Shield controlled by an Arduino Mega. Call me and get my location.
Project using Arduino Micro and CC1101 to display the tyre pressures transmitted at 433MHz by Renault tyres (based on Toyota TPMS project).
Use a Raspberry Pi to make your "dumb" car smarter!
Version 2 of my lane detection system!
How to make an Arduino 4WD RC Car with Joystick Controller (Arduino Uno | Joystick Shield | nRF24L01+PA+LNA).
