Hardware and Software products

Use this Double Tee Nut to connect V-Slot and most T-Slot Extrusions end to end or use it on any connection point that has 20mm spacing

The DPT-Board is the Linux board built for the Internet of Things with loads of I/O, dual wired ethernet and WiFi.

Eight advanced capacitive touch pads with LED indicators. Make sublime beats and control surfaces with your Raspberry Pi.

The DS1100 is a compact Tibbo BASIC/C-programmable controller with Ethernet connectivity.

The D-STPR-GEVK evaluates the AMIS30543, a micro-stepping stepper motor driver for bipolar stepper motors.

OMAP 4430-based Gumstix DuoVero™ computer-on-module. Includes WiLink8 wireless module for WiFi and Bluetooth connectivity.

No-Code Solution for Industrial IoT Connectivity. The most comprehensive software for IoT Edge Gateways with brownfield in mind

Speech recognition module designed to add versatile, robust and cost effective speech recognition capabilities to almost any application.

EdgeX Foundry is a vendor-neutral open source project building a common open framework for IoT edge computing.

Electrically isolated carrier board for Atlas Scientific EZO line of sensors.

400 Points Breadboard with 2 Positive & Negative Power Lines on both ends.

Stepper motor with a standard interface, when used directly pluggable.

The cheapest and most basic MEGA2560 R3 kit for the beginner.

8GB Micro SD card with Adapter pre-loaded with NOOBS. Easily boot up your Raspberry Pi and select the operating system of your choice.

ENCODER is a rotary encoder module in the FACES series. it need to stack FACES base and M5Core to use.

Puck.js is an intelligent Bluetooth button. Software can be uploaded, debugged and modified wirelessly from any modern computer or phone.

Everything you need pre-installed on the device - just plug in via USB and start writing JavaScript code immediately!

Add an Ethernet port to your Omega

The EZ-B v4/2 Wi-Fi Robot Controller is the next generation brain of your robot or IoT device, powering over 20,000 robots worldwide!

An embedded resistance temperature detector (RTD) sensor module.

The FAN2502/03 family utilize CMOS technology to offer extremely low power consumption, shutdown current, and dropout voltage.

Low-cost Electromagnetic Fault Injection (EMFI) tool, designed specifically for self-study and hobbiest research.

This is the FemtoBuck, a small-size single-output constant current LED driver. Each FemtoBuck has the capability to dim a single high-pow...

Raspberry Pi 2 Model B compatible HAT with on-board Gadgeteer-style sockets.

FEZ Spider II is a .NET Gadgeteer-compatible Mainboard.

Everything you need to get started with .NET Gadgeteer-technology.

Friendly and easy to use firmware loader using CMSIS-DAP debuggers.

Spice up your Flick HAT and Raspberry Pi with a stylish white and orange Flick HAT case!

Spice up your Flick Large and I2C device with a stylish white and orange Flick Large case!

Swipe, tap or flick your wrist to control your Raspberry Pi with the Flick pHAT.

FLIR is a module which integrates lwir micro thermal camera (Lepton 3.0) supplied by FLIR company. Real-time access to non-contact temperatu

Optical flow breakout board for motion detection

Enable positioning in the air with optical motion detection

The Analog Discovery signal cable assembly, or flywire, is the same assembly that ships with every Analog Discovery we sell.

The FMC-HDMI extends FMC-compatible FPGA systems with two HDMI Type A input ports.

M5Stack FRAME Panel Extended Install Components (2 Sets)

An open source, flexible, secure Internet of Things (IoT) development framework, useful to build and manage modern smart spaces.

The FUSB303 device is a fully autonomous USB Type−C™ controller optimized for 15 W or less applications

GameBender is a radical new game console, where you modify ("bend") games while you play them.

3.3V Uniform Sector Dual and Quad Serial Flash

gen4 3.2" Picaso Intelligent Display Module

You must have used a GPS receiver. It is easy to be found in most places, such as smartphones, cars, and computers.

This DFRobot 386AMP audio amplifier module uses the National Semiconductor LM386 audio power amplifier chip. It has 20 voltage gain.

This is an Arduino hydrogen gas sensor. It has high sensitivity to Hydrogen (H2) and less sensitivity to alcohol, LPG,cooking fumes .

Communication with the Analog ORP Meter is done using only simple wiring and programing.

It is an electric switch that is actuated by very little physical force.

what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough.

This magnetic sensor knows whether there is a magnetic object nearby or not.

The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage

It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. 

This is an Arduino compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board.

This Gravity: I2C HUB module is designed to connect up to 8 I2C devices to the main controller.

If you still don’t know how to play Internet of Things (IoT), the DFRobot OBLOQ module will be ideal for connecting you to the IoT world.

The Grove - 10A DC Current Sensor (ACS725) is a high precision DC current sensor based on ACS725.

The Grove - 12 Key Capacitive I2C Touch Sensor V2 (MPR121) is a multichannel proximity capacitive touch sensor.

Instead of using coil, packaged solid-state relays(SSR) use power semiconductor devices such as thyristors and transistors.

The Grove - 5-Way Switch can be used to detect the switch position and event like single click/double click/long press, etc

Capacitive Touch Slider Sensor (CY8C4014LQI) is a multifunctional touch sensor. You can touch the two buttons or slide on the 5-segment s...

The Grove - I2C Motor Driver (TB6612FNG) can drive two DC motors up to 12V/1.2A or drive one stepper motor up to 12V/1.2A

Grove - Luminance Sensor using APDS-9002 as lumens Sensor, provide the linear transform lumen intensity for the output voltage levels.