Hardware and Software products

Stepper motor controller is a PHPoC smart expansion board for stepper motor. You can easily control stepper motor by using this board.

With Stepper Motor Controller Ⅱ, you can control a stepper motor more precisely. It supports microstepping up to 1/32.

The phyCORE-iMX 8M Mini System on Module combines best-in-class performance and low power consumption with minimal size and affordability.

The Pi Adaptor connects to the Raspberry Pi’s 40 pin interface, breaking out selected pins for use with the MatesBUS.

The ultimate desktop retro arcade machine! Picade is a Raspberry Pi-powered mini arcade that you build yourself.

For connecting a chipKIT board to the Microchip PICkit 3 debugger/programmer.

The Pico SoM is a 36x40mm, high performance platform that is highly optimized for Internet of Things applications. It is pin-compatible w...

The PICO-IMX7 design based on the NXP i.MX7 processor is a purpose-built, small footprint hardware platform compatible with Intel Edison ...

Start your Android Things Project today with the PICO-PI-IMX7 based around the NXP i.MX7.Included in the pack is a USB Type-C cable for p...

PicoZed™ is a highly flexible, rugged, System-On-Module, or SOM that is based on the Xilinx Zynq®-7000 All Programmable (AP) SoC. It offe...

The PicoZed™ FMC Carrier Card V2 is the 2nd generation FMC Carrier supporting the PicoZed System-on-Module. This Carrier supports develop...

The Pi PoE Switch HAT is an add-on board for the Raspberry Pi that brings the Pi Supply Switch technology together with PoE.

M5Stack NEW Corner Connector for 1515 Aluminum Profile (10pcs a set)

Web-based remote desktop on cloud servers pre-installed with FPGA design software and licenses for research and development needs.

The Pmod ACL2 is a 3-axis MEMS accelerometer powered by the Analog Devices ADXL362.

The Pmod AD5 is an ADC that utilizes a fourth order sigma-delta modulator, a programmable gain array, and on-chip digital filtering.

The Pmod BB provides a ready-made solution for prototyping breadboard circuits.

This kit is a handy accompaniment to your 12-pin Pmod.

The extension cable lets you locate your Pmod away from its host board, and the included male gender changer provides extra connectivity.

The Pmod CDC1 is a capacitative sensor that uses the Analog Devices AD7156.

The Pmod CON1 has two terminals that can be used to provide power from an outside source and the other four can be used for data signals.

The Pmod DA2 is a 12-bit digital-to-analog converter powered by the Texas Instruments DAC121S101.

The Pmod DA3 is a 16-bit digital-to-analog converter powered by the Analog Devices AD5541A.

The Pmod DPG1 is a differential pressure gauge module.

The Pmod HB5 offers a 2A H-bridge circuit to drive small to medium sized DC motors.

The Pmod ISNS20 is a small current sense module with a digital SPI interface that is quick, accurate, and used for a variety of applications

The Pmod LED has four user LEDs that are individually driven through logic-level transistors.

The Pmod OC1 is an open collector BJT module using MMBT3904 transistors.

The Pmod OD1 is an open drain FET module using NTHD4508 transistors.

The Pmod R2R is resistor ladder with a R-2R resistor configuration.

The Pmod RS232 converts between digital logic voltage levels to RS232 voltage levels.

With the Pmod RS485, users can take advantage of the RS485 communication protocol with speeds up to 16 Mbps.

The Pmod SSD is a 2-digit 7-segment display that can toggle through GPIO signals and achieve persistence-of-vision.

The Pmod TC1 is a cold-junction thermocouple-to-digital converter module designed for a classic K-Type thermocouple wire.

The Pmod TMP3 is an ambient temperature sensor built around the Microchip TCN75A.

The POE-GEVB demonstrates the NCP1083, a member of the Power over Ethernet Powered Device (PoE-PD) product family.

These solderless pogo GPIO pins, nuts, bolts, and spacers make fitting a pHAT to your Pi Zero (or Zero W) super-quick and easy.

Power Supply for general project use.

For connecting probes with male BNC leads.

An inexpensive and convenient way to add personalized and custom hardware to your Pi-Plates based project.

The CY8CKIT-043 PSoC 4® M-Series Prototyping Kit is a low-cost platform for prototyping products using the PSoC 4 M-Series device family, wi

Top actuated microminiature SMT switch ideal for implementations such as keyless entry, remote control or control panel application.

Charge your Crazyflie 2.0 without plugging in a USB cable

The fastest way to write, compile, package and deploy cross-platform native applications for Windows, iOS, Android, Linux, & macOS.

The RAK14000 module is part of the WisBlock IO series, the RAK14000 is an Active Matrix Electrophoretic Display (AM EPD) module.

This product is now EOL

WisNode Lora/LoRaWAN Module,Support AS923, 868/915MHz, LoRa/TTN, Open source LoRa, RAK811 development board, LoRa Arduino shield

Raspberry Pi 3 Model B is the first module of the third-generation Raspberry Pi with Bluetooth 4.1 and Wifi.

There’s a lot of Raspberry Pi information going around lately. Whether it’s Pi A, A+, B, B+, or Pi 2 B, any forum will have thousands of ...

HIFI DAC+ Digital Audio Card Pinboard designed For Raspberry PI 2 Model B +, adopt high-end DAC chip PCM5122 of TI Company.

Next-gen microcontroller featuring PIO and upgrades (including the RP2350 chip with 2x Arm Cortex-M33 and 2x Hazard3 RISC-V processors).

Perfect for anyone who loves tech, wants a new geeky challenge or build their own personal Internet of Things.

Lets you receive digital DVB-T2 TV streams on your Raspberry Pi

An evaluation board developed by PHYTEC based on the Nordic Semiconductor nRF52840 SoC with Zephyr Project OS

This is a linear microphone array kit for raspberry pi which comes with four microphones and designed for AI and voice applications.

ReSpeaker is an open modular voice interface to hack things around you.

The Grove extension board can be stacked (connected) right onto the top of ReSpeaker Mic Array, bringing even more possibilities.

The reTerminal E10-1 is an expansion board for the reTerminal which empowers it rechargeable and portable functions, enhanced wireless commu

RiTFT-50-IOT-UX is the first-ever IoT display on the market.