Deploy PetaLinux 2024.2 on ZCU104 with setup, boot, and custom apps for advanced embedded system development.
Design the hardware and software to test the DisplayPort of an Ultra96 board.
This Amazon Alexa which is built with Raspberry pi and Bluetooth Speaker.
An autonomous car able to drive along a lane and react to roadsigns, obstacles and smart RFID markers, powered by OpenCV and Embedded Linux.
This tutorial will take you through the steps to get your RAK Wireless 831 Lora concentrator board up and running on the RPi Zero W.
The Snickerdoodle is an SoC, with processors and programmable logic. Let's look at how we can accelerate Python with PYNQ on it!
Booting Embedded Linux images on Zynq UltraScale+ MPSoC from the JTAG interface using the XSCT utility provided by Xilinx
Swapping hardware within microseconds: Possible when using FPGAs from AMD. The technique is called Dynamic Function Exchange.
Bring up the Ultra96 V2 in Vivado+PetaLinux 2019.2 with Wi-Fi connectivity.
The ML Yocto image includes an eIQ layer so you can run machine learning inference efficiently on the MaaXBoard.
See how to control an eInk display with the UC8151D chipset from a ZynqberryZero running Adafruit's Circuit Python.
Station to perform WiFi network audits, using Raspberry Pi Zero W and Raspberry Pi 3, with connection from the BT or mobile data cell phone.
Classification of fruits with transfer learning using TensorFlow on Jetson Nano.
M5Stack user Yama-chan combined a Raspberry Pi Zero with the Faces Keyboard kit to make an awesome linux pocket computer.
How should we go about figuring out how fast the Cora Z7 is? What about using both CPU cores? What about using a full OS?
No peer-to-peer messaging project should be without security. Testing with a "sandbox" cert prepares code for subsequent stricter controls.
A low-cost prototype for implementing autonomous parallel parking on a robot car with a Raspberry Pi.
Build a simple image and enable a Dynamic-Static IP via power up script (put aside Paw Patrol Zuma my son decided to place on the uZed).
Pynq is a handy tool for rapid prototyping of your IP designs done in Vitis HLS, so this project is a quick demo of that cycle.
This project walks through how to generate your own custom Linux image for the Kria KV260 board using its BSP as a starting point.
A small hand held computer with decent battery life and input power management.
Take advantage of the Zynqberry by taking the first step of porting your Raspberry Pi projects over to the Zynq platform.
Using Vitis for FPGA acceleration, this second part covers how to add the accelerated kernel to the embedded Linux image in PetaLinux.
Makibot is a ROS development Robot for SBC like Beaglebone, Jetson Nano and Raspberry Pi.
