Create a Basic Physical Bot Node that you'll control over Meshtastic. Meshbot v 0.1 up & running
Create an off-grid, wireless sensor mesh using the T1000E and Meshtastic to monitor and share environmental and GPS data without internet.
A portable, low-power LoRa mesh system using the Seeed T1000E and Wio SX1262 to relay messages across long distances via zonal forwarding.
Smart water level & flood alert system using LoRaWAN. Real-time data + env. sensors = early warnings with zero connectivity cost.
This system integrates gas leak detection and seismic activity monitoring into a single, low-power IoT solution. Using precise sensors and r
This system monitors environmental conditions and UV radiation in real time using low-power IoT sensors. It transmits data via LoRaWAN to Th
In this video, we’re building a private, offline messaging network using two ESP32 boards and LoRa® radios with the Meshtastic firmware.
Romain Letailleur / Jawad Lakhdari
In this project, you will learn how to wirelessly control a STREETLIGHT using LoRaWAN (Long Range Wide Area Network) technology.
This project shows how to use CRC Validation Mechanism&Data Acknowledgment Mechanism to Enhancing Data Reliability for LoRa Protocol.
It allows to manage easily our greenhouse.
How to get temperature sensor data from a remote Raspberry Pi via Wireless LoRa Protocol.
A simple add-on for mobile phones to enable SMS-like messaging in a group when outside cell coverage, or in disaster scenarios.
A standalone off-grid LoRa pager/messenger device for the end of the world. :-)
This project takes you through all the steps required to get your RAK831 LoRa Gateway module up and running with WiFi as the backhaul.
BoarMap detects boar sounds and alerts users, helping farmers protect their land and stay notified in real time.
Small, cheap, low-powered sensors are still a challenge to make. LoRa-Tooth uses $6 BLE modules to make untethered sensors with long range.
Here is how to make a single channel LoRa Gateway compatible with The Things Network using standard components you can buy everywhere.
Build your own LoRaWAN "The Things Network" packet-forwarding gateway on Windows 10 IoT Core in native .NET code.
Here's how to connect your phone to a LoRa module using standard components you can buy everywhere, along with an example chat program.
Long Range and Mesh: what do you want more! An easy step by step guide ( with ready made boards )? Let's go!
Introducing the next iteration of the Ripple LoRa QWERTY Messenger project, now with ultra low power standby mode!
The Ripple QWERTY firmware has been ported to the T-Deck!
This tutorial describes how to create your own LoRa GPS tracker using Wio Terminal. The Sender 's location on the map can be seen live.
