Ever wanted to display any hand-drawn image on your fancy oscilloscope? Well, now you can!
Using a smart GPU2, a smart SHIELD and Arduino we created a simple touchscreen oscilloscope!
How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.
Oscilloscope on Raspberry Pi using Linux kernel module
Turn your old oscilloscope into an analog clock with ESP32 and three wires.
Evive's menu is pre-loaded with lots of utility functions like control, mini scope, serial monitor etc.
This project will show how to use your OpenScope MZ in LabVIEW.
In this tutorial, we will go over how to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW.
Simplest possible way to make a compact retro-style analog oscilloscope with a cathode ray tube (CRT), which is powered by 12V.
Use the Analog Discover 2 as an affordable, compact and lightweight oscilloscope.
A 4-channel slowpoke oscilloscope and voltmeter up to 25 Volt DC (single ended) with data logging capabilities.
Calibrate the Analog Discovery 2 so you can ensure you are making the most accurate measurements possible.
Design and develop a simple soundcard oscilloscope under 1$
In this project, we will make a single trace oscilloscope using the gen4-uLCD-43DCT-CLB display module.
A realtime tool to see, analize, measure, compare, store data travelling trought the Slots; look like a logic analizer, but more versatile.
This project walks through how the Eclypse Z7 is used with WaveForms to verify the electrical functionality of my mini Helmholtz coils.
A four channel X/Y oscilloscope multiplexer.
A walk through of how to measure the current with an oscilloscope in WaveForms using a current viewing resistor (CVR).
