For use in DIY homebrew radio equipment such superheterodyne single/double conversion receiver, SDR, HAM QRP transceivers or RF generator.
This is a project of Radio Receiver LW/MW/SW Stereo FM with RDS, using Arduino Nano, Si473x Radio IC and 1.8in TFT color display ST7735.
A DIY cheap one-button internet radio.
This project will allow you to connect the nRF24L01+ radio module to the Raspberry Pi.
Internet radio with MP3 player over Bluetooth. This revision includes internet connection indicator and Folder Player.
Combined some examples to create a new, featured, project.
Build a great sounding FM radio with a cool display using an Arduino Nano and the SparkFun Si4703 FM tuner breakout.
Simple Arduino-based "World Band" radio receiver with very good characteristics.
Turn your MKR FOX 1200 into a battery-powered weather monitor that you can deploy EVERYWHERE.
Add an external S-meter on any Icom amateur radio transceiver that has a CI-V control port.
Today we are going to build an Internet radio device with a large 3.5” display using an inexpensive ESP32 board.
A complete AM / SW / SSB / FM RDS Radio Receiver, with Si4735, Arduino NANO and 1.8in TFT Display.
Embellish, protect and reduce the sheet metal look of your modified HP server power supply with this 3D-printed enclosure.
Internet connected car stereo with obd 2 and remote start.
In this tutorial, we are going to build a simple FM Radio receiver on a breadboard.
An easy to build and use stereo RDS FM receiver with RDA5807.
Make FM Radio full function by RDA5807M and arduino nano. Control by touch button
Build a digital FM radio! No manual tuning or inductors, just clear stereo audio output on a compact-sized PCB!
Covers all commercial stations with Si4730 IC, plus all amateur radio bands when you use Si4732 or Si4735.
WiFi internet radio built using an M5StickC plus (ESP32 Pico), external I²S DAC (PCM5102A), and stereo amplifier (Onkyo TX SV 434).
Setup of the ZCU102 with AD9371 FMC card for SDR applications.
A standalone internet radio using a Raspberry Pi and Arduino Uno with an LCD display.
A simple FM radio with a display that shows the frequency and audio amplifier.
Now the Radio has new firmware from Gert Baak with more visual and functional improvements. Also used Si4732 chip.
