In this project we will build a four -legged, movable robot and show that there are no limits to the imagination.
The idea is to put an AI agent in the doorbell, capable of taking actions freely. What could possibly go wrong?
A touchless automatic motion sensor trash can.
The sunflower follows the light using a servo motor and two photoresistors.
Introducing a super easy automated control labyrinth marble maze.
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
This project shows how to control a servo motor with a smartphone via Bluetooth.
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
This project is based on Arduino radar (HC-SR04) which is digitally visualized using Processing.
A basic robot using Arduino.
In this article we discuss about how to Servo motor interface with Arduino Uno
In this project, you can learn how to control servo motor using serial monitor.
Bring down the technical and cost barriers of dynamic quadruped robot to a DIY pet.
Control a Servo Motor with Arduino and a pushbutton. Servo only rotate when the pushbutton is pressed.
A super simple stair climbing robot.
Building an RFIDD access control system.
Record and play back a few seconds of input stored in EEPROM.
A walking insect looking thing made from leftovers.
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
This tutorial shows how to make a servo lock.
This project will show you how to transmit variables to control a servo motor.
This is 3-axis CNC plotter/engraver based on GRBL software and 2020 aluminum extrusions. Low-cost engraving and PCB manufacturing dual side.
All my servos are a little bit different to each other - I've built a rig to measure what PWM values turn my servos to a specific angle.
