Compact RGB LED Cube with 384 pixels in an 8cm³ design. Powered by ATmega328, WS2812B LEDs. Full tutorial from PCB to assembly.
Awesome ESP32-based smartwatch with environmental sensors and a laser that can control all of your other projects remotely.
Learn to build an SMS gateway using WIZnet Pico on Arduino IDE, sending messages from WebServer to phones via LTE Cat. M1.
MicroMote: The ESP-Now Based Gesture Remote
In this project, I use an RTSP camera feed with my Edge Impulse model running on my KR260 to have a wireless setup.
Build a complete indoor asset tracking IoT solution using the Blues Wireless Notecard, an ESP32 host MCU, the Notecarrier-F, and Datacake.
iNap Malinka is a Raspberry based handheld with the NRF24L01+PA+LNA radio module, running RetroPie!
Express your love as a RAKstar
A nanoFramework + Seeed LoRa-E5 module based LoRaWAN client. Tested on The Things Network (TTN) and The Things Industries(TTI)
Build an Azure cost monitor with the Adafruit MagTag!
This tutorial covers how to use a USB Wi-Fi module commonly used with Raspberry Pi boards to add wireless capabilities to the Zynqberry.
A nanoFramework + RAKwireless RAK811 module based LoRaWAN client. Tested on The Things Network (TTN) the Spark NZ networks.
Started with a The Things Network to Azure IoT Hub gateway. Then some "scope creep" added Device Provisioning Service & IoT Central support.
Use a pair of packet radios to draw and then send pictures between the two devices without WiFi or Bluetooth.
Wireless wearable device that allows you to get a risk index of your daily exposure to potentially dangerous environments.
A wearable, sensor-packed ESP32 IoT device with TFT display.
Meow is a smart Slack Bot and starts to wave directly after you’ve received a Slack message.
A sample Wilderness Labs Meadow nRF24L01 client for my Windows 10 IoT Core RPi nRF24L01 telemetry field gateways.
Start exploring your new development board in less than 30 seconds!
Creating a system in order to detect wildfire using deep learning programmation on a Raspberry Pi 4 and a Wisol module by Sigfox.
Make your own motor driver shield PCB for an Arduino Pro Mini using an Arduino Pro Mini.
As a request from an athlete friend to build cheap yet effective device to improve reaction training I came up with this!
We will be interfacing the high powered E32 1 Watt LoRa module from eByte with an ESP32, the same method is used for an Arduino or ESP8266.
TinyPICO is a super-small dev board based on the ESP32-PICO-D4. Here are the first steps to set it up with MicroPython!
