A Go board game system that shows the state of Go stones through facial expressions.
Build a car hacking spy device to remotely read and send CAN commands and track GPS location. All based on open source software/hardware.
A powerful Maritime Instrument & Display Controller, based on UDOO Neo, acting as a navigator, chart plotter, wireless NMEA multiplexer & ?
A simple Arduino/ESP32 crawler with PS4 BT remote control, but with 2x MCU and an advanced CAN-based communication ("drive-by-wire").
Working on complex systems? Maybe a CAN network will make it a lot easier. Talk to different devices over two wires with automotive tech.
An adapter to intercept CAN messages from CAN bus and broadcast them over BLE using ESP32.
Bored of the old servo control board? No feedback? No precision? A thousand wires to manage? Well, no more!
High speed CAN data performance display
Breakout board to add a CAN FD transceiver TLE9371VSJ (up to 8MBit/s) to your CAN capable microcontroller.
Data Analysis For Sailing Performance, A Maker's Solution
Custom car infotainment system with Arduino and Android head unit, interacting with the car over CAN BUS.
How to transmit and receive high speed CAN or CAN FD messages using Raspberry Pi.
Let me share how to read DC current using ACS712 sensor then convert ADC Digital values into bytes and send them through CAN Bus.
This will go over how to use the NoCAN platform by Omzlo and uFire sensors to measure EC, pH and ORP with graphs by the TICK stack.
With Raspberry PICO and a couple of CAN BUS interfaces it is possible to perform a simple can bus logger
Hold on to your car just a little bit longer.
LoRa-to-CAN-BUS Gateway using ATMEGA328P
For several months now, it has become impossible to buy a Raspberry Pi from official resellers, the alternative is Rock 4 SE
This project illustrate how simple is to use nanoFramework to send and receive messages over a CAN bus.
A CAN-Bus Module, with Integrated Relay and onboard battery-charger based on MH-CD42, built around the ATMEGA8a/168/328
Poor man's CAN tester with 2 diodes and 1 resistor.
How to implement CANBUS communication.
This project showcases CAN communication between PSoC4L and FM4 device.
Don't touch a thing! Let Infineon's Radar Shield2Go do it for you. Learn how to automate a trash can with the XMC2Go and Arduino IDE!
