Notice board using Arduino and Bluetooth Module
The project gives a short description on how to design a USB design which would enumerate as an HID, COM PORT and audio devices.
How to communicate between 2 Arduino UNOs through SPI communication protocol to exchange data or control other Arduino using one.
A complete solution as a LoRa controller with a display to show all the messages and buttons to interact with it. With ESP8266 and TP4056.
In this tutorial we will explore Wireless Communication and learn how to control an LED with a button the NRF24L01 modules and arduino.
A system to let someone ask for help at school or in the workplace without having to do it publicly.
How to connect Arduino Yun to QIoT Suite Lite
Converts input Morse code to letter(letter by letter). Then converts it to sound.
This project walks through the hardware design for the ZynqberryZero in Vivado 2022.1 to be able to use Raspberry Pi accessories with it.
This project shows how to use an lwIP server on the SP701 to be able to send it commands/data on a local area network (LAN).
Learning how to build a Wi-Fi controlled boat with using Wukong2040 and Raspberry Pi Pico W
In the realm of embedded systems, firmware plays a critical role in the operation of devices.
We could use a device reminding us of taking a short break to move and give a moment of respite to our eyes.
A simple LinkIt ONE project that sends an SMS notification when there is a power outage or when power has been restored.
MC3362 and ADF4351 based, modularized, NFM receiver. This receiver is designed to listen to the 2m band amateur radio conversations.
This is my last project, a dual USB converter to serial and I2C. With this tool, you can listen TX and RX lines at the same time.
Provocation 1: Counter Culture
Interfacing Arduino and Onion Omega2 IoT platform will make creating connected devices easier!
In this introduction, we will introduce how to start with Grove Indoor Environment Kit for Intel Edison (Node.js).
Unleash Flipper Zero's ModBUS power! This tutorial guides you through setting up the Add-On board & teaches you to sniff & inject packets.
Learning braille with the BraillePi and a refreshable braille-display attached is easy and fun at home or at school.
Unlike any other car project
Connect Two Arduinos using I2C Communication by connecting a DHT11 sensor to the Slave Arduino and Display the Temperature on Master Arduino
Easy to build Remote Power On/Off + e-Lock. Works from a Wi-Fi device. Unlocked RPi 5 may also be started with a button.
