This was a test project to get my KiCad 9.0 install setup and decided to make some minor modifications to the original Arduino Uno R3.
A step by step guide to setting up the GeForce GTX 1060 GPU with UDOO X86 ULTRA.
This project aims to develop a prototype to implement various topologies of power converters to carry out experiments from your home
This is the GOD version of this microcontroller, adds up a lot of features. Sensor, modules and displays can be directly plugged in.
Breadboard friendly dev-stick with an embedded USB-UART bridge which acts as both a UPDI programmer and a usb-serial adapter.
An IoT board designed to expand the connectivity of the WIO terminal adding 7 I2C ports, 5 PWM, 5 GPIOS, and 12V & 5V power management.
Transfer Data Between any USB_STORAGE_MEDIA devices.
This is an example on porting TensorFlow Lite to the low-powered i. MX RT1010 for on-device wake-word detection.
It can be interfaced with all kinds of electronic components including sensors, displays, cameras, motors, etc.
The reel board is an evaluation board with on-board components such as a debug adapter, sensors, battery holder, passive display, and USB.
STM32F103C8T6, STM32F303CBT6 based evaluation board. It can be used for Arduino.
Designing and assembling a development board for the Renesas SC14CVMDECT module.
This is a clone board on which I soldered all the components, it is fully compatible with Arduino Nano and UNO.
Breaking news! youyeetoo Tech has launched a new product - the Youyeetoo X1 an x86 SBC.
Highly integrated Power Management Module for single cell Li-Po battery systems
PCB Board to adjust an antenna to determine the gain and the transmitting range of radio controllers.
Imagine if you took the arduino Leonardo and put I2C chips on it tot test your communication skills. With lipo charge and Boost converter.
